[PATCH v2 1/5] arm: spear6xx: add labels to various nodes in spear600.dtsi
Thomas Petazzoni
thomas.petazzoni at free-electrons.com
Tue Mar 21 03:51:48 PDT 2017
Having labels allows to more easily reference nodes in .dts files
including spear600.dtsi.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
---
arch/arm/boot/dts/spear600.dtsi | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/arm/boot/dts/spear600.dtsi b/arch/arm/boot/dts/spear600.dtsi
index 9f60a7b..8459286 100644
--- a/arch/arm/boot/dts/spear600.dtsi
+++ b/arch/arm/boot/dts/spear600.dtsi
@@ -49,7 +49,7 @@
#interrupt-cells = <1>;
};
- clcd at fc200000 {
+ clcd: clcd at fc200000 {
compatible = "arm,pl110", "arm,primecell";
reg = <0xfc200000 0x1000>;
interrupt-parent = <&vic1>;
@@ -57,7 +57,7 @@
status = "disabled";
};
- dma at fc400000 {
+ dmac: dma at fc400000 {
compatible = "arm,pl080", "arm,primecell";
reg = <0xfc400000 0x1000>;
interrupt-parent = <&vic1>;
@@ -97,7 +97,7 @@
status = "disabled";
};
- ehci at e1800000 {
+ ehci_usb0: ehci at e1800000 {
compatible = "st,spear600-ehci", "usb-ehci";
reg = <0xe1800000 0x1000>;
interrupt-parent = <&vic1>;
@@ -105,7 +105,7 @@
status = "disabled";
};
- ehci at e2000000 {
+ ehci_usb1: ehci at e2000000 {
compatible = "st,spear600-ehci", "usb-ehci";
reg = <0xe2000000 0x1000>;
interrupt-parent = <&vic1>;
@@ -113,7 +113,7 @@
status = "disabled";
};
- ohci at e1900000 {
+ ohci_usb0: ohci at e1900000 {
compatible = "st,spear600-ohci", "usb-ohci";
reg = <0xe1900000 0x1000>;
interrupt-parent = <&vic1>;
@@ -121,7 +121,7 @@
status = "disabled";
};
- ohci at e2100000 {
+ ohci_usb1: ohci at e2100000 {
compatible = "st,spear600-ohci", "usb-ohci";
reg = <0xe2100000 0x1000>;
interrupt-parent = <&vic1>;
@@ -135,7 +135,7 @@
compatible = "simple-bus";
ranges = <0xd0000000 0xd0000000 0x30000000>;
- serial at d0000000 {
+ uart0: serial at d0000000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0xd0000000 0x1000>;
interrupt-parent = <&vic0>;
@@ -143,7 +143,7 @@
status = "disabled";
};
- serial at d0080000 {
+ uart1: serial at d0080000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0xd0080000 0x1000>;
interrupt-parent = <&vic0>;
@@ -181,7 +181,7 @@
interrupts = <4>;
};
- i2c at d0200000 {
+ i2c: i2c at d0200000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,designware-i2c";
@@ -191,7 +191,7 @@
status = "disabled";
};
- rtc at fc900000 {
+ rtc: rtc at fc900000 {
compatible = "st,spear600-rtc";
reg = <0xfc900000 0x1000>;
interrupts = <10>;
--
2.7.4
More information about the linux-arm-kernel
mailing list