[PATCH v2 04/20] ARM: sun8i: dt: Add DT bindings documentation for Allwinner syscon

[Rob Herring]

On Tue, Mar 14, 2017 at 03:18:40PM +0100, Corentin Labbe wrote:
> Signed-off-by: Corentin Labbe <clabbe.montjoie at gmail.com>
> ---
>  .../devicetree/bindings/misc/allwinner,syscon.txt     | 19 +++++++++++++++++++
>  1 file changed, 19 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/misc/allwinner,syscon.txt
> 
> diff --git a/Documentation/devicetree/bindings/misc/allwinner,syscon.txt b/Documentation/devicetree/bindings/misc/allwinner,syscon.txt
> new file mode 100644
> index 0000000..9f5f1f5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/misc/allwinner,syscon.txt
> @@ -0,0 +1,19 @@
> +* Allwinner sun8i system controller
> +
> +This file describes the bindings for the system controller present in
> +Allwinner SoC H3, A83T and A64.
> +The principal function of this syscon is to control EMAC PHY choice and
> +config.
> +
> +Required properties for the system controller:
> +- reg: address and length of the register for the device.
> +- compatible: should be "syscon" and one of the following string:
> +		"allwinner,sun8i-h3-system-controller"
> +		"allwinner,sun8i-a64-system-controller"
> +		"allwinner,sun8i-a83t-system-controller"
> +
> +Example:
> +syscon: syscon at 01c00000 {
> +	compatible = "syscon", "allwinner,sun8i-h3-system-controller";

Wrong order of compatibles.

> +	reg = <0x01c00000 0x1000>;
> +};
> -- 
> 2.10.2
>