[GIT PULL] Renesas ARM64 Based SoC DT Updates for v4.12
Simon Horman
horms+renesas at verge.net.au
Mon Mar 20 01:57:30 PDT 2017
Hi Olof, Hi Kevin, Hi Arnd,
Please consider these Renesas ARM64 based SoC DT updates for v4.12.
The following changes since commit c1ae3cfa0e89fa1a7ecc4c99031f5e9ae99d9201:
Linux 4.11-rc1 (2017-03-05 12:59:56 -0800)
are available in the git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-arm64-dt-for-v4.12
for you to fetch changes up to 3cbe33367d4fd480a92fbc131a96fa925be9e95d:
arm64: dts: r8a7796: salvator-x: Drop superfluous status update for frequency override (2017-03-13 10:21:16 +0100)
----------------------------------------------------------------
Renesas ARM64 Based SoC DT Updates for v4.12
Cleanup:
* Drop superfluous status update for frequency override from all
r8a779[56] boards
* Tidyup Audio-DMAC channel for DVC for r8a7795 SoC
* Remove unit-address and reg from integrated cache on r8a779[56] SoCs
Enhancements:
* Add all Cortex-A53 and Cortex-A57 CPU cores to r8a7796 SoC
* Add Cortex-A53 CPU cores to r8a7795 SoC
* Update memory node to 4 GiB map on h3ulcb board
* Upgrade to PSCI v1.0 to support Suspend-to-RAM on r8a779[56] SoCs
* Add SCIF1 (DEBUG1) to r8a7796/salvator-x board
* Add all SCIF and HSCIF nodes with DMA enabled to r8a7796 SoC
* Set drive-strength for ravb pins for r8a7795/salvator-x board
* Enable gigabit ethernet on r8a779[56]/salvator-x boards
* Enable I2C for DVFS device r8a779[56]/salvator-x boards
----------------------------------------------------------------
Dien Pham (2):
arm64: dts: r8a7796: Add I2C for DVFS device node
arm64: dts: r8a7796: salvator-x: Add I2C for DVFS device support
Geert Uytterhoeven (11):
arm64: dts: r8a7795: Add Cortex-A53 CPU cores
arm64: dts: r8a7795: Add Cortex-A53 PMU node
arm64: dts: r8a7795: Remove unit-addresses and regs from integrated caches
arm64: dts: r8a7796: Remove unit-address and reg from integrated cache
arm64: dts: r8a7796: Add CA53 L2 cache-controller node
arm64: dts: r8a7796: Add Cortex-A53 CPU cores
arm64: dts: r8a7796: Add Cortex-A53 PMU node
arm64: dts: h3ulcb: Drop superfluous status update for frequency override
arm64: dts: r8a7795: salvator-x: Drop superfluous status updates for frequency overrides
arm64: dts: m3ulcb: Drop superfluous status update for frequency override
arm64: dts: r8a7796: salvator-x: Drop superfluous status update for frequency override
Kazuya Mizuguchi (4):
arm64: dts: r8a7795: Use rgmii-txid phy-mode for EthernetAVB
arm64: dts: r8a7795: salvator-x: Fix EthernetAVB PHY timing
arm64: dts: r8a7796: Use rgmii-txid phy-mode for EthernetAVB
arm64: dts: r8a7796: salvator-x: Fix EthernetAVB PHY timing
Keita Kobayashi (2):
arm64: dts: r8a7795: Add I2C for DVFS core to dtsi
arm64: dts: r8a7795: salvator-x: Enable I2C for DVFS device
Khiem Nguyen (2):
arm64: dts: r8a7795: Upgrade to PSCI v1.0 to support Suspend-to-RAM
arm64: dts: r8a7796: Upgrade to PSCI v1.0 to support Suspend-to-RAM
Kuninori Morimoto (1):
arm64: dts: r8a7795: Tidyup Audio-DMAC channel for DVC
Niklas Söderlund (1):
arm64: dts: r8a7795: salvator-x: Set drive-strength for ravb pins
Takeshi Kihara (2):
arm64: dts: r8a7796: Add Cortex-A57 CPU cores
arm64: dts: r8a7796: Add Cortex-A57 PMU node
Ulrich Hecht (5):
arm64: dts: r8a7796 dtsi: Add all HSCIF nodes
arm64: dts: r8a7796: Add all SCIF nodes
arm64: dts: r8a7796: Enable SCIF DMA
arm64: dts: r8a7796: salvator-x: add SCIF1 (DEBUG1)
arm64: dts: r8a7796: Enable HSCIF DMA
Vladimir Barinov (2):
arm64: dts: h3ulcb: Update memory node to 4 GiB map
arm64: dts: h3ulcb: Fix EthernetAVB PHY timing
arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts | 29 ++-
arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts | 37 +--
arch/arm64/boot/dts/renesas/r8a7795.dtsi | 86 ++++++-
arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts | 1 -
arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts | 32 ++-
arch/arm64/boot/dts/renesas/r8a7796.dtsi | 265 ++++++++++++++++++++-
6 files changed, 384 insertions(+), 66 deletions(-)
More information about the linux-arm-kernel
mailing list