[PATCH v5 00/39] i.MX Media Driver

[Russell King - ARM Linux]

On Sun, Mar 19, 2017 at 03:57:56PM +0200, Vladimir Zapolskiy wrote:
> Hi Russell,
> 
> On 03/18/2017 10:43 PM, Russell King - ARM Linux wrote:
> > On Sat, Mar 18, 2017 at 12:58:27PM -0700, Steve Longerbeam wrote:
> >> Can you share your gstreamer pipeline? For now, until
> >> VIDIOC_ENUM_FRAMESIZES is implemented, try a pipeline that
> >> does not attempt to specify a frame rate. I use the attached
> >> script for testing, which works for me.
> > 
> > It's nothing more than
> > 
> >   gst-launch-1.0 -v v4l2src ! <any needed conversions> ! xvimagesink
> > 
> > in my case, the conversions are bayer2rgbneon.  However, this only shows
> > you the frame rate negotiated on the pads (which is actually good enough
> > to show the issue.)
> 
> I'm sorry for potential offtopic, but is bayer2rgbneon element found in
> any officially supported by GStreamer plugin?

No it isn't.  Google is wonderful, please make use of planetary search
facilities.

> Can it be a point of failure?

There's a good reason why I dumped a full debug log using GST_DEBUG=*:9,
analysed it for the cause of the failure, and tried several different
pipelines, including the standard bayer2rgb plugin.

Please don't blame this on random stuff after analysis of the logs _and_
reading the appropriate plugin code has shown where the problem is.  I
know gstreamer can be very complex, but it's very possible to analyse
the cause of problems and pin them down with detailed logs in conjunction
with the source code.

-- 
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.