[PATCH v2 2/6] pinctrl: rockchip: rename RK1108 to RV1108
Heiko Stuebner
heiko at sntech.de
Fri Mar 17 10:18:36 PDT 2017
From: Andy Yan <andy.yan at rock-chips.com>
Rockchip finally named the SOC as RV1108, so change it.
Signed-off-by: Andy Yan <andy.yan at rock-chips.com>
[adapted rk1108 dtsi to keep bisectability]
Signed-off-by: Heiko Stuebner <heiko at sntech.de>
---
arch/arm/boot/dts/rk1108.dtsi | 2 +-
drivers/pinctrl/pinctrl-rockchip.c | 76 +++++++++++++++++++-------------------
2 files changed, 39 insertions(+), 39 deletions(-)
diff --git a/arch/arm/boot/dts/rk1108.dtsi b/arch/arm/boot/dts/rk1108.dtsi
index d6194bff7afe..6c8fc19d0ecd 100644
--- a/arch/arm/boot/dts/rk1108.dtsi
+++ b/arch/arm/boot/dts/rk1108.dtsi
@@ -222,7 +222,7 @@
};
pinctrl: pinctrl {
- compatible = "rockchip,rk1108-pinctrl";
+ compatible = "rockchip,rv1108-pinctrl";
rockchip,grf = <&grf>;
rockchip,pmu = <&pmugrf>;
#address-cells = <1>;
diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c
index 1e276dfe1763..9000a986caab 100644
--- a/drivers/pinctrl/pinctrl-rockchip.c
+++ b/drivers/pinctrl/pinctrl-rockchip.c
@@ -59,7 +59,7 @@
#define GPIO_LS_SYNC 0x60
enum rockchip_pinctrl_type {
- RK1108,
+ RV1108,
RK2928,
RK3066B,
RK3188,
@@ -713,13 +713,13 @@ static int rockchip_set_mux(struct rockchip_pin_bank *bank, int pin, int mux)
return ret;
}
-#define RK1108_PULL_PMU_OFFSET 0x10
-#define RK1108_PULL_OFFSET 0x110
-#define RK1108_PULL_PINS_PER_REG 8
-#define RK1108_PULL_BITS_PER_PIN 2
-#define RK1108_PULL_BANK_STRIDE 16
+#define RV1108_PULL_PMU_OFFSET 0x10
+#define RV1108_PULL_OFFSET 0x110
+#define RV1108_PULL_PINS_PER_REG 8
+#define RV1108_PULL_BITS_PER_PIN 2
+#define RV1108_PULL_BANK_STRIDE 16
-static void rk1108_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,
+static void rv1108_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,
int pin_num, struct regmap **regmap,
int *reg, u8 *bit)
{
@@ -728,27 +728,27 @@ static void rk1108_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,
/* The first 24 pins of the first bank are located in PMU */
if (bank->bank_num == 0) {
*regmap = info->regmap_pmu;
- *reg = RK1108_PULL_PMU_OFFSET;
+ *reg = RV1108_PULL_PMU_OFFSET;
} else {
- *reg = RK1108_PULL_OFFSET;
+ *reg = RV1108_PULL_OFFSET;
*regmap = info->regmap_base;
/* correct the offset, as we're starting with the 2nd bank */
*reg -= 0x10;
- *reg += bank->bank_num * RK1108_PULL_BANK_STRIDE;
+ *reg += bank->bank_num * RV1108_PULL_BANK_STRIDE;
}
- *reg += ((pin_num / RK1108_PULL_PINS_PER_REG) * 4);
- *bit = (pin_num % RK1108_PULL_PINS_PER_REG);
- *bit *= RK1108_PULL_BITS_PER_PIN;
+ *reg += ((pin_num / RV1108_PULL_PINS_PER_REG) * 4);
+ *bit = (pin_num % RV1108_PULL_PINS_PER_REG);
+ *bit *= RV1108_PULL_BITS_PER_PIN;
}
-#define RK1108_DRV_PMU_OFFSET 0x20
-#define RK1108_DRV_GRF_OFFSET 0x210
-#define RK1108_DRV_BITS_PER_PIN 2
-#define RK1108_DRV_PINS_PER_REG 8
-#define RK1108_DRV_BANK_STRIDE 16
+#define RV1108_DRV_PMU_OFFSET 0x20
+#define RV1108_DRV_GRF_OFFSET 0x210
+#define RV1108_DRV_BITS_PER_PIN 2
+#define RV1108_DRV_PINS_PER_REG 8
+#define RV1108_DRV_BANK_STRIDE 16
-static void rk1108_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank,
+static void rv1108_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank,
int pin_num, struct regmap **regmap,
int *reg, u8 *bit)
{
@@ -757,19 +757,19 @@ static void rk1108_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank,
/* The first 24 pins of the first bank are located in PMU */
if (bank->bank_num == 0) {
*regmap = info->regmap_pmu;
- *reg = RK1108_DRV_PMU_OFFSET;
+ *reg = RV1108_DRV_PMU_OFFSET;
} else {
*regmap = info->regmap_base;
- *reg = RK1108_DRV_GRF_OFFSET;
+ *reg = RV1108_DRV_GRF_OFFSET;
/* correct the offset, as we're starting with the 2nd bank */
*reg -= 0x10;
- *reg += bank->bank_num * RK1108_DRV_BANK_STRIDE;
+ *reg += bank->bank_num * RV1108_DRV_BANK_STRIDE;
}
- *reg += ((pin_num / RK1108_DRV_PINS_PER_REG) * 4);
- *bit = pin_num % RK1108_DRV_PINS_PER_REG;
- *bit *= RK1108_DRV_BITS_PER_PIN;
+ *reg += ((pin_num / RV1108_DRV_PINS_PER_REG) * 4);
+ *bit = pin_num % RV1108_DRV_PINS_PER_REG;
+ *bit *= RV1108_DRV_BITS_PER_PIN;
}
#define RK2928_PULL_OFFSET 0x118
@@ -1271,7 +1271,7 @@ static int rockchip_get_pull(struct rockchip_pin_bank *bank, int pin_num)
return !(data & BIT(bit))
? PIN_CONFIG_BIAS_PULL_PIN_DEFAULT
: PIN_CONFIG_BIAS_DISABLE;
- case RK1108:
+ case RV1108:
case RK3188:
case RK3288:
case RK3368:
@@ -1318,7 +1318,7 @@ static int rockchip_set_pull(struct rockchip_pin_bank *bank,
spin_unlock_irqrestore(&bank->slock, flags);
break;
- case RK1108:
+ case RV1108:
case RK3188:
case RK3288:
case RK3368:
@@ -1581,7 +1581,7 @@ static bool rockchip_pinconf_pull_valid(struct rockchip_pin_ctrl *ctrl,
pull == PIN_CONFIG_BIAS_DISABLE);
case RK3066B:
return pull ? false : true;
- case RK1108:
+ case RV1108:
case RK3188:
case RK3288:
case RK3368:
@@ -2699,7 +2699,7 @@ static int rockchip_pinctrl_probe(struct platform_device *pdev)
return 0;
}
-static struct rockchip_pin_bank rk1108_pin_banks[] = {
+static struct rockchip_pin_bank rv1108_pin_banks[] = {
PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0", IOMUX_SOURCE_PMU,
IOMUX_SOURCE_PMU,
IOMUX_SOURCE_PMU,
@@ -2709,15 +2709,15 @@ static struct rockchip_pin_bank rk1108_pin_banks[] = {
PIN_BANK_IOMUX_FLAGS(3, 32, "gpio3", 0, 0, 0, 0),
};
-static struct rockchip_pin_ctrl rk1108_pin_ctrl = {
- .pin_banks = rk1108_pin_banks,
- .nr_banks = ARRAY_SIZE(rk1108_pin_banks),
- .label = "RK1108-GPIO",
- .type = RK1108,
+static struct rockchip_pin_ctrl rv1108_pin_ctrl = {
+ .pin_banks = rv1108_pin_banks,
+ .nr_banks = ARRAY_SIZE(rv1108_pin_banks),
+ .label = "RV1108-GPIO",
+ .type = RV1108,
.grf_mux_offset = 0x10,
.pmu_mux_offset = 0x0,
- .pull_calc_reg = rk1108_calc_pull_reg_and_bit,
- .drv_calc_reg = rk1108_calc_drv_reg_and_bit,
+ .pull_calc_reg = rv1108_calc_pull_reg_and_bit,
+ .drv_calc_reg = rv1108_calc_drv_reg_and_bit,
};
static struct rockchip_pin_bank rk2928_pin_banks[] = {
@@ -2975,8 +2975,8 @@ static struct rockchip_pin_ctrl rk3399_pin_ctrl = {
};
static const struct of_device_id rockchip_pinctrl_dt_match[] = {
- { .compatible = "rockchip,rk1108-pinctrl",
- .data = (void *)&rk1108_pin_ctrl },
+ { .compatible = "rockchip,rv1108-pinctrl",
+ .data = (void *)&rv1108_pin_ctrl },
{ .compatible = "rockchip,rk2928-pinctrl",
.data = (void *)&rk2928_pin_ctrl },
{ .compatible = "rockchip,rk3036-pinctrl",
--
2.11.0
More information about the linux-arm-kernel
mailing list