[PATCH] ARM: omap2+: Revert omap-smp.c changes resetting CPU1 during boot

[Tony Lindgren]

* Russell King - ARM Linux <linux at armlinux.org.uk> [170317 02:27]:
> On Thu, Mar 16, 2017 at 08:29:25AM -0700, Tony Lindgren wrote:
> > * Tony Lindgren <tony at atomide.com> [170315 10:24]:
> > > * Tony Lindgren <tony at atomide.com> [170314 11:16]:
> > > > * Andrew F. Davis <afd at ti.com> [170314 10:59]:
> > > > Then onto the other related patches..
> > > > 
> > > > > We re-park cpu1 in bootROM in U-Boot already, in the U-Boot tree:
> > > > > arch/arm/mach-omap2/omap5/sec_entry_cpu1.S
> > > > 
> > > > OK good to hear.
> > > > 
> > > > > omap_smc_sec_cpu1() wakes up cpu1 into the function cpu1_entry(), this
> > > > > makes an SMC call to setup the core, then re-parks itself back in bootROM.
> > > > > Relevant code to run on cpu1:
> > > > > 
> > > > > > #define AUX_CORE_BOOT_0		0x48281800
> > > > > > #define AUX_CORE_BOOT_1		0x48281804
> > > > > > /* DRA7xx ROM code function "startup_BootSlave". This function is where CPU1
> > > > > >  * waits on WFE, polling on AUX_CORE_BOOT_x registers.
> > > > > >  * This address is same for J6 and J6 Eco.
> > > > > >  */
> > > > > > #define ROM_FXN_STARTUP_BOOTSLAVE     0x00038a64
> > > > > >
> > > > > > ldr	r4, =AUX_CORE_BOOT_0
> > > > > > mov	r5, #0x0
> > > > > > str	r5, [r4]
> > > > > > ldr	r4, =ROM_FXN_STARTUP_BOOTSLAVE
> > > > > > bx	r4	@ Jump back to ROM
> > > > > 
> > > > > We would have to do this in kernel. The issue I'm thinking we are going
> > > > > to hit is that the parking function in bootROM expects the MMU to be
> > > > > off. Although we don't really need to turn it off as long as we can
> > > > > identity map the bootROM area, the AUX_CORE_BOOT_0/1 space, and wherever
> > > > > we plan to exit the parking loop.
> > > > 
> > > > Would be good to hear what Russell thinks we should do here to park
> > > > CPU1.
> > > 
> > > How about we introduce smp_park_secondary()?
> > > 
> > > Then soft_restart() can call it between setup_mm_for_reboot()
> > > and cpu_proc_fin()?
> > 
> > Hmm that probably won't help as we'd have to still have a 1:1
> > mapping in cpu_die() to put CPU1 into WFI and release it in
> > smp_park_secondary() to the bootrom.
> > 
> > Anyways, I think in your use case it's the suspend/resume that needs
> > the state preserved for CPU1. Do you need kexec working in your use
> > case?
> 
> I think you're trying way too hard and making this too complicated.  I
> put forward my comments on it via email on Monday - is there a reason
> why you can't follow my recommendations (which are exactly what Linux
> expects) of the to-be-unplugged CPU?

Well I don't have a problem with that. But I think Andrew has a use case
where he needs CPU1 configuration from bootloader preserved for HS
dra7. Maybe we can preserve and restore it in suspend/resume case?

> Why do you need the CPU to spin in the kernel when you hot-unplug it?

I don't need it spinning in my use cases. So let's wait to hear what
exactly Andrew needs.

> Why can't you reset the CPU when it's died, possibly releasing the
> reset again to get it into the boot rom (which is where it'll be at
> boot time.)

Yes that would make most sense to me. Andrew, does that break your use
case again for CPU1 for suspend/restore?

> To detect older kernels, you could write a magic identifier into the
> boot address registers from a new kernel when taking the CPU offline.
> (eg, the value it has at normal system boot.)  When you attempt to
> bring CPUs online, check the value, if it isn't set correctly, assume
> that the CPU has gone awol, and reset it as you're doing now.

Yeah OK. I think I got the kexec boot reset handling check part sorted
out in v2 of this patch.

Regards,

Tony