[PATCH 1/2] arm64: marvell: dts: add PPv2.2 description to Armada 7K/8K
Thomas Petazzoni
thomas.petazzoni at free-electrons.com
Thu Mar 16 08:16:27 PDT 2017
This commit adds the description of the PPv2.2 hardware block for the
Marvell Armada 7K and Armada 8K processors, and their corresponding Armada
7040 and 8040 Development boards.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
---
arch/arm64/boot/dts/marvell/armada-7040-db.dts | 25 +++++++++++++++
arch/arm64/boot/dts/marvell/armada-8040-db.dts | 16 ++++++++++
.../boot/dts/marvell/armada-cp110-master.dtsi | 37 ++++++++++++++++++++++
.../arm64/boot/dts/marvell/armada-cp110-slave.dtsi | 37 ++++++++++++++++++++++
4 files changed, 115 insertions(+)
diff --git a/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
index 070b589..bb0e1e8 100644
--- a/arch/arm64/boot/dts/marvell/armada-7040-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
@@ -146,3 +146,28 @@
&cpm_usb3_1 {
status = "okay";
};
+
+&cpm_mdio {
+ phy0: ethernet-phy at 0 {
+ reg = <0>;
+ };
+ phy1: ethernet-phy at 1 {
+ reg = <1>;
+ };
+};
+
+&cpm_ethernet {
+ status = "okay";
+};
+
+&cpm_eth1 {
+ status = "okay";
+ phy = <&phy0>;
+ phy-mode = "sgmii";
+};
+
+&cpm_eth2 {
+ status = "okay";
+ phy = <&phy1>;
+ phy-mode = "rgmii-id";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
index 6e6f182..80e685e 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
@@ -124,6 +124,22 @@
status = "okay";
};
+&cpm_mdio {
+ phy1: ethernet-phy at 1 {
+ reg = <1>;
+ };
+};
+
+&cpm_ethernet {
+ status = "okay";
+};
+
+&cpm_eth2 {
+ status = "okay";
+ phy = <&phy1>;
+ phy-mode = "rgmii-id";
+};
+
/* CON5 on CP1 expansion */
&cps_pcie2 {
status = "okay";
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
index 3a99c36..9a2ce2a 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
@@ -59,6 +59,43 @@
interrupt-parent = <&gic>;
ranges = <0x0 0x0 0xf2000000 0x2000000>;
+ cpm_ethernet: ethernet at 0 {
+ compatible = "marvell,armada-7k-pp22";
+ reg = <0x0 0x100000>, <0x129000 0xb000>;
+ clocks = <&cpm_syscon0 1 3>, <&cpm_syscon0 1 9>, <&cpm_syscon0 1 5>;
+ clock-names = "pp_clk", "gop_clk", "mg_clk";
+ status = "disabled";
+ dma-coherent;
+
+ cpm_eth0: eth0 {
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ port-id = <0>;
+ gop-port-id = <0>;
+ status = "disabled";
+ };
+
+ cpm_eth1: eth1 {
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ port-id = <1>;
+ gop-port-id = <2>;
+ status = "disabled";
+ };
+
+ cpm_eth2: eth2 {
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ port-id = <2>;
+ gop-port-id = <3>;
+ status = "disabled";
+ };
+ };
+
+ cpm_mdio: mdio at 12a200 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "marvell,orion-mdio";
+ reg = <0x12a200 0x10>;
+ };
+
cpm_syscon0: system-controller at 440000 {
compatible = "marvell,cp110-system-controller0",
"syscon";
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
index 9e09c4d..c9dfa24 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
@@ -59,6 +59,43 @@
interrupt-parent = <&gic>;
ranges = <0x0 0x0 0xf4000000 0x2000000>;
+ cps_ethernet: ethernet at 0 {
+ compatible = "marvell,armada-7k-pp22";
+ reg = <0x0 0x100000>, <0x129000 0xb000>;
+ clocks = <&cps_syscon0 1 3>, <&cps_syscon0 1 9>, <&cps_syscon0 1 5>;
+ clock-names = "pp_clk", "gop_clk", "mg_clk";
+ status = "disabled";
+ dma-coherent;
+
+ cps_eth0: eth0 {
+ interrupts = <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>;
+ port-id = <0>;
+ gop-port-id = <0>;
+ status = "disabled";
+ };
+
+ cps_eth1: eth1 {
+ interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
+ port-id = <1>;
+ gop-port-id = <2>;
+ status = "disabled";
+ };
+
+ cps_eth2: eth2 {
+ interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
+ port-id = <2>;
+ gop-port-id = <3>;
+ status = "disabled";
+ };
+ };
+
+ cps_mdio: mdio at 12a200 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "marvell,orion-mdio";
+ reg = <0x12a200 0x10>;
+ };
+
cps_syscon0: system-controller at 440000 {
compatible = "marvell,cp110-system-controller0",
"syscon";
--
2.7.4
More information about the linux-arm-kernel
mailing list