[PATCH v2 2/4] arm64: dts: r8a7796: Add reset control properties
Geert Uytterhoeven
geert+renesas at glider.be
Thu Mar 16 07:07:24 PDT 2017
Add properties to describe the reset topology for on-SoC devices:
- Add the "#reset-cells" property to the CPG/MSSR device node,
- Add resets and reset-names properties to the various device nodes.
This allows to reset SoC devices using the Reset Controller API.
Note that all resets added match the corresponding module clocks.
Signed-off-by: Geert Uytterhoeven <geert+renesas at glider.be>
---
v2:
- Add reset properties to recently added device nodes (i2c_dvfs,
hscif[0-4], scif[01345], tsc).
---
arch/arm64/boot/dts/renesas/r8a7796.dtsi | 46 ++++++++++++++++++++++++++++++++
1 file changed, 46 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
index a90abf14dc4e7c79..2ec1ed5f499165ad 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
@@ -155,6 +155,7 @@
clocks = <&cpg CPG_MOD 408>;
clock-names = "clk";
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 408>;
};
timer {
@@ -175,6 +176,7 @@
reg = <0 0xe6020000 0 0x0c>;
clocks = <&cpg CPG_MOD 402>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 402>;
status = "disabled";
};
@@ -190,6 +192,7 @@
interrupt-controller;
clocks = <&cpg CPG_MOD 912>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 912>;
};
gpio1: gpio at e6051000 {
@@ -204,6 +207,7 @@
interrupt-controller;
clocks = <&cpg CPG_MOD 911>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 911>;
};
gpio2: gpio at e6052000 {
@@ -218,6 +222,7 @@
interrupt-controller;
clocks = <&cpg CPG_MOD 910>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 910>;
};
gpio3: gpio at e6053000 {
@@ -232,6 +237,7 @@
interrupt-controller;
clocks = <&cpg CPG_MOD 909>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 909>;
};
gpio4: gpio at e6054000 {
@@ -246,6 +252,7 @@
interrupt-controller;
clocks = <&cpg CPG_MOD 908>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 908>;
};
gpio5: gpio at e6055000 {
@@ -260,6 +267,7 @@
interrupt-controller;
clocks = <&cpg CPG_MOD 907>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 907>;
};
gpio6: gpio at e6055400 {
@@ -274,6 +282,7 @@
interrupt-controller;
clocks = <&cpg CPG_MOD 906>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 906>;
};
gpio7: gpio at e6055800 {
@@ -288,6 +297,7 @@
interrupt-controller;
clocks = <&cpg CPG_MOD 905>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 905>;
};
pfc: pin-controller at e6060000 {
@@ -322,6 +332,7 @@
clock-names = "extal", "extalr";
#clock-cells = <2>;
#power-domain-cells = <0>;
+ #reset-cells = <1>;
};
rst: reset-controller at e6160000 {
@@ -350,6 +361,7 @@
interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 926>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 926>;
status = "disabled";
};
@@ -362,6 +374,7 @@
interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 931>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 931>;
dmas = <&dmac1 0x91>, <&dmac1 0x90>,
<&dmac2 0x91>, <&dmac2 0x90>;
dma-names = "tx", "rx", "tx", "rx";
@@ -378,6 +391,7 @@
interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 930>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 930>;
dmas = <&dmac1 0x93>, <&dmac1 0x92>,
<&dmac2 0x93>, <&dmac2 0x92>;
dma-names = "tx", "rx", "tx", "rx";
@@ -394,6 +408,7 @@
interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 929>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 929>;
dmas = <&dmac1 0x95>, <&dmac1 0x94>,
<&dmac2 0x95>, <&dmac2 0x94>;
dma-names = "tx", "rx", "tx", "rx";
@@ -410,6 +425,7 @@
interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 928>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 928>;
dmas = <&dmac0 0x97>, <&dmac0 0x96>;
dma-names = "tx", "rx";
i2c-scl-internal-delay-ns = <110>;
@@ -425,6 +441,7 @@
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 927>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 927>;
dmas = <&dmac0 0x99>, <&dmac0 0x98>;
dma-names = "tx", "rx";
i2c-scl-internal-delay-ns = <110>;
@@ -440,6 +457,7 @@
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 919>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 919>;
dmas = <&dmac0 0x9b>, <&dmac0 0x9a>;
dma-names = "tx", "rx";
i2c-scl-internal-delay-ns = <110>;
@@ -455,6 +473,7 @@
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 918>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 918>;
dmas = <&dmac0 0x9d>, <&dmac0 0x9c>;
dma-names = "tx", "rx";
i2c-scl-internal-delay-ns = <6>;
@@ -473,6 +492,7 @@
assigned-clocks = <&cpg CPG_CORE R8A7796_CLK_CANFD>;
assigned-clock-rates = <40000000>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 916>;
status = "disabled";
};
@@ -488,6 +508,7 @@
assigned-clocks = <&cpg CPG_CORE R8A7796_CLK_CANFD>;
assigned-clock-rates = <40000000>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 915>;
status = "disabled";
};
@@ -504,6 +525,7 @@
assigned-clocks = <&cpg CPG_CORE R8A7796_CLK_CANFD>;
assigned-clock-rates = <40000000>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 914>;
status = "disabled";
channel0 {
@@ -553,6 +575,7 @@
"ch24";
clocks = <&cpg CPG_MOD 812>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 812>;
phy-mode = "rgmii-txid";
#address-cells = <1>;
#size-cells = <0>;
@@ -573,6 +596,7 @@
<&dmac2 0x31>, <&dmac2 0x30>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 520>;
status = "disabled";
};
@@ -590,6 +614,7 @@
<&dmac2 0x33>, <&dmac2 0x32>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 519>;
status = "disabled";
};
@@ -607,6 +632,7 @@
<&dmac2 0x35>, <&dmac2 0x34>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 518>;
status = "disabled";
};
@@ -623,6 +649,7 @@
dmas = <&dmac0 0x37>, <&dmac0 0x36>;
dma-names = "tx", "rx";
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 517>;
status = "disabled";
};
@@ -639,6 +666,7 @@
dmas = <&dmac0 0x39>, <&dmac0 0x38>;
dma-names = "tx", "rx";
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 516>;
status = "disabled";
};
@@ -655,6 +683,7 @@
<&dmac2 0x51>, <&dmac2 0x50>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 207>;
status = "disabled";
};
@@ -671,6 +700,7 @@
<&dmac2 0x53>, <&dmac2 0x52>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 206>;
status = "disabled";
};
@@ -684,6 +714,7 @@
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 310>;
status = "disabled";
};
@@ -699,6 +730,7 @@
dmas = <&dmac0 0x57>, <&dmac0 0x56>;
dma-names = "tx", "rx";
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 204>;
status = "disabled";
};
@@ -714,6 +746,7 @@
dmas = <&dmac0 0x59>, <&dmac0 0x58>;
dma-names = "tx", "rx";
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 203>;
status = "disabled";
};
@@ -730,6 +763,7 @@
<&dmac2 0x5b>, <&dmac2 0x5a>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 202>;
status = "disabled";
};
@@ -743,6 +777,7 @@
<&dmac2 0x41>, <&dmac2 0x40>;
dma-names = "tx", "rx";
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 211>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -758,6 +793,7 @@
<&dmac2 0x43>, <&dmac2 0x42>;
dma-names = "tx", "rx";
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 210>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -772,6 +808,7 @@
dmas = <&dmac0 0x45>, <&dmac0 0x44>;
dma-names = "tx", "rx";
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 209>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -786,6 +823,7 @@
dmas = <&dmac0 0x47>, <&dmac0 0x46>;
dma-names = "tx", "rx";
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 208>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -820,6 +858,7 @@
clocks = <&cpg CPG_MOD 219>;
clock-names = "fck";
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 219>;
#dma-cells = <1>;
dma-channels = <16>;
};
@@ -853,6 +892,7 @@
clocks = <&cpg CPG_MOD 218>;
clock-names = "fck";
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 218>;
#dma-cells = <1>;
dma-channels = <16>;
};
@@ -886,6 +926,7 @@
clocks = <&cpg CPG_MOD 217>;
clock-names = "fck";
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 217>;
#dma-cells = <1>;
dma-channels = <16>;
};
@@ -897,6 +938,7 @@
clocks = <&cpg CPG_MOD 314>;
max-frequency = <200000000>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 314>;
status = "disabled";
};
@@ -907,6 +949,7 @@
clocks = <&cpg CPG_MOD 313>;
max-frequency = <200000000>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 313>;
status = "disabled";
};
@@ -917,6 +960,7 @@
clocks = <&cpg CPG_MOD 312>;
max-frequency = <200000000>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 312>;
status = "disabled";
};
@@ -927,6 +971,7 @@
clocks = <&cpg CPG_MOD 311>;
max-frequency = <200000000>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 311>;
status = "disabled";
};
@@ -940,6 +985,7 @@
<GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 522>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 522>;
#thermal-sensor-cells = <1>;
status = "okay";
};
--
2.7.4
More information about the linux-arm-kernel
mailing list