[PATCH v2 3/4] mmc: pwrseq_simple: Add an optional pre-power-on-delay
Ulf Hansson
ulf.hansson at linaro.org
Thu Mar 16 06:01:19 PDT 2017
On 6 March 2017 at 15:17, Romain Perier <romain.perier at collabora.com> wrote:
> Some devices need a while between the enablement of its clk and the time
> where the reset line is asserted. When this time happens between the
> pre_power_on and the post_power_on callbacks, there is a need to do an
> msleep at the end of the pre_power_on callback.
>
> This commit adds an optional DT property for such devices.
>
> Signed-off-by: Romain Perier <romain.perier at collabora.com>
> ---
> Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt | 2 ++
Split DT documentation for code changes. And make sure DT maintainers
are in the loop discussing new DT bindings.
> drivers/mmc/core/pwrseq_simple.c | 6 ++++++
> 2 files changed, 8 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt
> index e254368..821feaaf 100644
> --- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt
> +++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt
> @@ -18,6 +18,8 @@ Optional properties:
> "ext_clock" (External clock provided to the card).
> - post-power-on-delay-ms : Delay in ms after powering the card and
> de-asserting the reset-gpios (if any)
> +- pre-power-on-delay-ms : Delay in ms before powering the card and
> + asserting the reset-gpios (if any)
We have been thinking of adding this before. It seems reasonable to
me, however in the earlier case we ended up adding a new mmc pwrseq
variant.
Let's see where we ends up here...
>
> Example:
>
> diff --git a/drivers/mmc/core/pwrseq_simple.c b/drivers/mmc/core/pwrseq_simple.c
> index e27019f..d8d7166 100644
> --- a/drivers/mmc/core/pwrseq_simple.c
> +++ b/drivers/mmc/core/pwrseq_simple.c
> @@ -27,6 +27,7 @@ struct mmc_pwrseq_simple {
> struct mmc_pwrseq pwrseq;
> bool clk_enabled;
> u32 post_power_on_delay_ms;
> + u32 pre_power_on_delay_ms;
> struct clk *ext_clk;
> struct gpio_descs *reset_gpios;
> };
> @@ -60,6 +61,9 @@ static void mmc_pwrseq_simple_pre_power_on(struct mmc_host *host)
> }
>
> mmc_pwrseq_simple_set_gpios_value(pwrseq, 1);
> +
> + if (pwrseq->pre_power_on_delay_ms)
> + msleep(pwrseq->pre_power_on_delay_ms);
> }
>
> static void mmc_pwrseq_simple_post_power_on(struct mmc_host *host)
> @@ -130,6 +134,8 @@ static int mmc_pwrseq_simple_probe(struct platform_device *pdev)
>
> device_property_read_u32(dev, "post-power-on-delay-ms",
> &pwrseq->post_power_on_delay_ms);
> + device_property_read_u32(dev, "pre-power-on-delay-ms",
> + &pwrseq->pre_power_on_delay_ms);
>
> pwrseq->pwrseq.dev = dev;
> if (device_property_read_bool(dev, "post-ios-power-on"))
> --
> 2.9.3
>
Kind regards
Uffe
More information about the linux-arm-kernel
mailing list