[PATCH v2 2/2] clk: stm32f4: fix timeout management for pll and ready gate
gabriel.fernandez at st.com
gabriel.fernandez at st.com
Thu Mar 16 01:16:41 PDT 2017
From: Gabriel Fernandez <gabriel.fernandez at st.com>
Use a classic polling to test bit ready.
And the shift of the bit ready of LSE & LSI were wrongs.
Fixes: 861adc44d290 ("clk: stm32f4: Add LSI & LSE clocks")
Signed-off-by: Gabriel Fernandez <gabriel.fernandez at st.com>
---
drivers/clk/clk-stm32f4.c | 43 +++++++++++++++++++++++++++++--------------
1 file changed, 29 insertions(+), 14 deletions(-)
diff --git a/drivers/clk/clk-stm32f4.c b/drivers/clk/clk-stm32f4.c
index cf9449b3..68e2a4e 100644
--- a/drivers/clk/clk-stm32f4.c
+++ b/drivers/clk/clk-stm32f4.c
@@ -531,19 +531,26 @@ static int stm32f4_pll_is_enabled(struct clk_hw *hw)
return clk_gate_ops.is_enabled(hw);
}
+#define PLL_TIMEOUT 10000
+
static int stm32f4_pll_enable(struct clk_hw *hw)
{
struct clk_gate *gate = to_clk_gate(hw);
struct stm32f4_pll *pll = to_stm32f4_pll(gate);
- int ret = 0;
- unsigned long reg;
+ int bit_status;
+ unsigned int timeout = PLL_TIMEOUT;
- ret = clk_gate_ops.enable(hw);
+ if (clk_gate_ops.is_enabled(hw))
+ return 0;
+
+ clk_gate_ops.enable(hw);
- ret = readl_relaxed_poll_timeout_atomic(base + STM32F4_RCC_CR, reg,
- reg & (1 << pll->bit_rdy_idx), 0, 10000);
+ do {
+ bit_status = !(readl(gate->reg) & BIT(pll->bit_rdy_idx));
- return ret;
+ } while (bit_status && --timeout);
+
+ return bit_status;
}
static void stm32f4_pll_disable(struct clk_hw *hw)
@@ -834,24 +841,32 @@ struct stm32_rgate {
u8 bit_rdy_idx;
};
-#define RTC_TIMEOUT 1000000
+#define RGATE_TIMEOUT 50000
static int rgclk_enable(struct clk_hw *hw)
{
struct clk_gate *gate = to_clk_gate(hw);
struct stm32_rgate *rgate = to_rgclk(gate);
- u32 reg;
- int ret;
+ int bit_status;
+ unsigned int timeout = RGATE_TIMEOUT;
+
+ if (clk_gate_ops.is_enabled(hw))
+ return 0;
disable_power_domain_write_protection();
clk_gate_ops.enable(hw);
- ret = readl_relaxed_poll_timeout_atomic(gate->reg, reg,
- reg & rgate->bit_rdy_idx, 1000, RTC_TIMEOUT);
+ do {
+ bit_status = !(readl(gate->reg) & BIT(rgate->bit_rdy_idx));
+ if (bit_status)
+ udelay(100);
+
+ } while (bit_status && --timeout);
enable_power_domain_write_protection();
- return ret;
+
+ return bit_status;
}
static void rgclk_disable(struct clk_hw *hw)
@@ -1533,7 +1548,7 @@ static void __init stm32f4_rcc_init(struct device_node *np)
}
clks[CLK_LSI] = clk_register_rgate(NULL, "lsi", "clk-lsi", 0,
- base + STM32F4_RCC_CSR, 0, 2, 0, &stm32f4_clk_lock);
+ base + STM32F4_RCC_CSR, 0, 1, 0, &stm32f4_clk_lock);
if (IS_ERR(clks[CLK_LSI])) {
pr_err("Unable to register lsi clock\n");
@@ -1541,7 +1556,7 @@ static void __init stm32f4_rcc_init(struct device_node *np)
}
clks[CLK_LSE] = clk_register_rgate(NULL, "lse", "clk-lse", 0,
- base + STM32F4_RCC_BDCR, 0, 2, 0, &stm32f4_clk_lock);
+ base + STM32F4_RCC_BDCR, 0, 1, 0, &stm32f4_clk_lock);
if (IS_ERR(clks[CLK_LSE])) {
pr_err("Unable to register lse clock\n");
--
1.9.1
More information about the linux-arm-kernel
mailing list