[PATCH v4 3/8] dt-bindings: Add Ampire AM-480272H3TMQW-T01H panel
Yannick Fertre
yannick.fertre at st.com
Wed Mar 15 10:02:09 PDT 2017
Signed-off-by: Yannick Fertre <yannick.fertre at st.com>
---
.../display/panel/ampire,am-480272h3tmqw-t01h.txt | 26 ++++++++++++++++++++++
1 file changed, 26 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/ampire,am-480272h3tmqw-t01h.txt
diff --git a/Documentation/devicetree/bindings/display/panel/ampire,am-480272h3tmqw-t01h.txt b/Documentation/devicetree/bindings/display/panel/ampire,am-480272h3tmqw-t01h.txt
new file mode 100644
index 0000000..e70111f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/ampire,am-480272h3tmqw-t01h.txt
@@ -0,0 +1,26 @@
+Ampire AM-480272H3TMQW-T01H 4.3" WQVGA TFT LCD panel
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
+
+Required properties:
+- compatible: should be "ampire,am-480272h3tmqw-t01h"
+
+Optional properties:
+- power-supply: regulator to provide the supply voltage
+- enable-gpios: GPIO pin to enable or disable the panel
+- backlight: phandle of the backlight device attached to the panel
+
+Optional nodes:
+- Video port for RGB input.
+
+Example:
+ panel_rgb: panel-rgb {
+ compatible = "ampire,am-480272h3tmqw-t01h";
+ enable-gpios = <&gpioa 8 1>;
+ port {
+ panel_in_rgb: endpoint {
+ remote-endpoint = <&controler_out_rgb>;
+ };
+ };
+ };
--
1.9.1
More information about the linux-arm-kernel
mailing list