[PATCH] arm64: enable ARCH_WANT_RELAX_ORDER for aarch64

[Ding Tianhong]

Hi Robin：

On 2017/3/13 21:31, Robin Murphy wrote:
> On 13/03/17 12:03, Ding Tianhong wrote:
>> The ARCH_WANT_RELAX_ORDER will enable Relaxed Ordering (RO) which allows
>> transactions that do not have any order of completion requirements to
>> complete more efficiently compare to the Stricted Ordering (SO) for ixbge
>> nic card.
> 
> Which ixgbe NIC? As far as I can see we have an arch-level config option
> here which applies to one single driver, and doesn't even cover all the
> hardware supported by that driver (82598, for example, still has the
> #ifndef CONFIG_SPARC in the equivalent place). Looking at the history,
> I'd prefer to at least know what the "various issues with certain
> chipsets" were, and why they wouldn't affect ARM systems,  before making
> any judgement about whether this could be considered universally safe
> for arm64.
> 

Indeed, in fact if the chipsets didn't support RO mode or has some errata for RO mode, it may
occur some issues, but it looks no such aarch64 chips, maybe I miss something.

There are several intel nic card could support enable relax order, so need another patch to rename the SPARC
to ARCH_WANT_RELAX_ORDER, the universal name looks more better.

>> The system will see high write-to-memory performance when RO is
>> enabled on the data transactions just like the SPARC did.
>>
>> The aarch64 pcie controller could both support Relaxed Ordering (RO)
> 
> What is "the AArch64 PCIe controller", exactly? Disregarding that
> talking of PCIe in terms of the CPU ISA makes little sense, I can barely
> name two ARMv8-based systems which nominally use the same PCIe IP, and
> the amount of various quirks and incompatibilities I'm aware of leaves
> me with the default assumption that any such unqualified blanket
> statement is probably wrong. I think we need some much more considered
> reasoning here.
> 

Agree, till now I could only test on hip06/hip07 board and get the better performance,
maybe I could test on other aarch64 platform.

>> and Stricted Ordering (SO), so enable ARCH_WANT_RELAX_ORDER for ixgbe
>> nic card to get much more better performance, and didn't see any
>> adverse effects.
>>
>> Nic Card(Ixgbe)			Disable RO	|	Enable RO
>> Performance(Per thread)		8.4Gb/s		|	9.4Gb/s
>>
>> Tested by Iperf on Hip06/Hip07 Soc Board.
>>
>> Signed-off-by: Ding Tianhong <dingtianhong at huawei.com>
>> ---
>>  arch/arm64/Kconfig | 1 +
>>  1 file changed, 1 insertion(+)
>>
>> diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
>> index 8c7c244..36249a3 100644
>> --- a/arch/arm64/Kconfig
>> +++ b/arch/arm64/Kconfig
>> @@ -115,6 +115,7 @@ config ARM64
>>  	select SPARSE_IRQ
>>  	select SYSCTL_EXCEPTION_TRACE
>>  	select THREAD_INFO_IN_TASK
>> +	select ARCH_WANT_RELAX_ORDER
> 
> I'd say the first order of business is to rename this config option to
> IXBGE_82599_WANT_RELAXED_ORDER so that it's not entirely misleading and

not only for 82599, including 82598, 82576....

> ambiguous. At first glance it looks far more like something scary to do
> with memory barriers than a network driver option. Howcome this isn't
> just in drivers/net/intel/Kconfig as a "default y if SPARC" bool anyway?

didn't see any essential differences, and I still need to get some Acked by arm maintainer.

> 

Yes, more memory barriers always affect the performance especially for
some architecture not just like sparc, any optimization should be taken seriously
especially for aarch64.


Thanks.
Ding

> Robin.
> 
>>  	help
>>  	  ARM 64-bit (AArch64) Linux support.
>>
> 
> 
> .
>