[PATCH v5 6/8] ARM: dts: imx6q-icore: Add touchscreen node

[Jagan Teki]

From: Jagan Teki <jagan at amarulasolutions.com>

max11801 touchscreen on Engicam iCoreM6 Quad module is
connected via i2c1, so add tc: max11801 at 48 on i2c1.

Cc: Domenico Acri <domenico.acri at engicam.com>
Cc: Matteo Lisi <matteo.lisi at engicam.com>
Cc: Michael Trimarchi <michael at amarulasolutions.com>
Cc: Shawn Guo <shawnguo at kernel.org>
Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
---
Changes for v5:
- %s/arm/ARM/g with subject prefix
Changes for v4:
- Newly added patch

 arch/arm/boot/dts/imx6q-icore.dts | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/boot/dts/imx6q-icore.dts b/arch/arm/boot/dts/imx6q-icore.dts
index 73f34d1..8c1a572 100644
--- a/arch/arm/boot/dts/imx6q-icore.dts
+++ b/arch/arm/boot/dts/imx6q-icore.dts
@@ -58,6 +58,15 @@
 	status = "okay";
 };
 
+&i2c1 {
+	ts: max11801 at 48 {
+		compatible = "max11801";
+		reg = <0x48>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <31 2>;
+	};
+};
+
 &ldb {
 	status = "okay";
 
-- 
1.9.1