[PATCH v4 7/8] arm64: dts: mt8173: move clock from phy node into port nodes

[Chunfeng Yun]

there is a reference clock for each port, HighSpeed port is 48M,
and SuperSpeed port is usually 26M. it is flexible to move it
into port node, then unused clock can be disabled.

Signed-off-by: Chunfeng Yun <chunfeng.yun at mediatek.com>
---
 arch/arm64/boot/dts/mediatek/mt8173.dtsi |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 1dc4629..1c9e0d5 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -764,8 +764,6 @@
 		u3phy: usb-phy at 11290000 {
 			compatible = "mediatek,mt8173-u3phy";
 			reg = <0 0x11290000 0 0x800>;
-			clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>;
-			clock-names = "u3phya_ref";
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
@@ -773,18 +771,24 @@
 
 			u2port0: usb-phy at 11290800 {
 				reg = <0 0x11290800 0 0x100>;
+				clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>;
+				clock-names = "ref";
 				#phy-cells = <1>;
 				status = "okay";
 			};
 
 			u3port0: usb-phy at 11290900 {
 				reg = <0 0x11290900 0 0x700>;
+				clocks = <&clk26m>;
+				clock-names = "ref";
 				#phy-cells = <1>;
 				status = "okay";
 			};
 
 			u2port1: usb-phy at 11291000 {
 				reg = <0 0x11291000 0 0x100>;
+				clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>;
+				clock-names = "ref";
 				#phy-cells = <1>;
 				status = "okay";
 			};
-- 
1.7.9.5