pcie-iproc: broken 2nd (& 3rd?) controller support by c3245a566400 ("PCI: iproc: Request host bridge window resources")

Rafał Miłecki zajec5 at gmail.com
Fri Mar 10 08:02:48 PST 2017


On 03/09/2017 07:22 PM, Bjorn Helgaas wrote:
> On Thu, Mar 09, 2017 at 08:39:07AM +0100, Rafał Miłecki wrote:
>> On 03/08/2017 01:56 PM, Rafał Miłecki wrote:
>>> I just tried upgrading BCM5301X from 4.4 to 4.9 and noticed I don't see card
>>> connected to the 2nd controller.
>>>
>>> pcie_iproc_bcma bcma0:7: PCI host bridge to bus 0000:00
>>> pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fffffff]
>>> pcie_iproc_bcma bcma0:7: link: UP
>>> PCI: bus0: Fast back to back transfers disabled
>>> pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
>>> PCI: bus1: Fast back to back transfers disabled
>>> pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x080fffff]
>>> pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x08007fff 64bit]
>>> pci 0000:00:00.0: PCI bridge to [bus 01]
>>> pci 0000:00:00.0:   bridge window [mem 0x08000000-0x080fffff]
>>>
>>> pcie_iproc_bcma bcma0:8: resource collision: [mem 0x40000000-0x47ffffff] conflicts with PCIe MEM space [mem 0x40000000-0x47ffffff]
>>> pcie_iproc_bcma bcma0:8: PCIe controller setup failed
>>> pcie_iproc_bcma: probe of bcma0:8 failed with error -16
>>>
>>>
>>> This used to work with older kernels because there wasn't any collision check:
>>>
>>> pcie_iproc_bcma bcma0:7: PCI host bridge to bus 0000:00
>>> pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fffffff]
>>> pcie_iproc_bcma bcma0:7: link: UP
>>> PCI: bus0: Fast back to back transfers disabled
>>> pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
>>> PCI: bus1: Fast back to back transfers disabled
>>> pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x080fffff]
>>> pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x08007fff 64bit]
>>> pci 0000:00:00.0: PCI bridge to [bus 01]
>>> pci 0000:00:00.0:   bridge window [mem 0x08000000-0x080fffff]
>>>
>>> pcie_iproc_bcma bcma0:8: PCI host bridge to bus 0001:00
>>> pci_bus 0001:00: root bus resource [mem 0x40000000-0x47ffffff]
>>> pcie_iproc_bcma bcma0:8: link: UP
>>> PCI: bus0: Fast back to back transfers disabled
>>> pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
>>> PCI: bus1: Fast back to back transfers disabled
>>> pci 0001:00:00.0: BAR 8: assigned [mem 0x40000000-0x400fffff]
>>> pci 0001:01:00.0: BAR 0: assigned [mem 0x40000000-0x40007fff 64bit]
>>> pci 0001:00:00.0: PCI bridge to [bus 01]
>>> pci 0001:00:00.0:   bridge window [mem 0x40000000-0x400fffff]
>>>
>>>
>>> I guess the check is OK after all and the real problem is iproc driver assigning
>>> the same resource.
>>>
>>> Broadcom team: could you take a look at this, please?
>>
>> I found a reason of this conflict (and probably random crashes I started
>> seeing with 4.9). I believe we have a memory corruption.
>
> Yep, we're using a resource structure on the stack when we shouldn't.  Can
> you try the patch below?

Works great! Will you push it with
Cc: stable at vger.kernel.org # v4.8+
please?

Thanks for looking at this!

Also see below...


> (...)
>  	if (ret)
>  		dev_err(dev, "PCIe controller setup failed\n");
> -
> -	pci_free_resource_list(&res);
> +		pci_free_resource_list(&resources);
> +		return ret;
> +	}

Works great, except it doesn't compile (braces) ;)



More information about the linux-arm-kernel mailing list