[PATCH v2 11/11] ARM: sun8i: a33: Add devfreq-based GPU cooling

[Quentin Schulz]

From: Maxime Ripard <maxime.ripard at free-electrons.com>

This adds GPU thermal throttling for the Allwinner A33.

Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
Signed-off-by: Quentin Schulz <quentin.schulz at free-electrons.com>
---

added in v2

 arch/arm/boot/dts/sun8i-a23-a33.dtsi |  3 +++
 arch/arm/boot/dts/sun8i-a33.dtsi     | 24 ++++++++++++++++++++++++
 2 files changed, 27 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
index 5e8725d..dc4e942 100644
--- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
@@ -495,6 +495,9 @@
 
 			assigned-clocks = <&ccu CLK_GPU>;
 			assigned-clock-rates = <384000000>;
+			cooling-min-level = <0>;
+			cooling-max-level = <2>;
+			#cooling-cells = <2>;
 		};
 
 		gic: interrupt-controller at 01c81000 {
diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi
index df6e77f..6552762 100644
--- a/arch/arm/boot/dts/sun8i-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a33.dtsi
@@ -202,6 +202,16 @@
 					trip = <&cpu_alert1>;
 					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
+
+				map2 {
+					trip = <&gpu_alert0>;
+					cooling-device = <&mali 1 THERMAL_NO_LIMIT>;
+				};
+
+				map3 {
+					trip = <&gpu_alert1>;
+					cooling-device = <&mali 2 THERMAL_NO_LIMIT>;
+				};
 			};
 
 			trips {
@@ -212,6 +222,13 @@
 					type = "passive";
 				};
 
+				gpu_alert0: gpu_alert0 {
+					/* milliCelsius */
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
 				cpu_alert1: cpu_alert1 {
 					/* milliCelsius */
 					temperature = <90000>;
@@ -219,6 +236,13 @@
 					type = "hot";
 				};
 
+				gpu_alert1: gpu_alert1 {
+					/* milliCelsius */
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
 				cpu_crit: cpu_crit {
 					/* milliCelsius */
 					temperature = <110000>;
-- 
2.9.3