[PATCH v5 00/39] i.MX Media Driver

Steve Longerbeam slongerbeam at gmail.com
Thu Mar 9 20:52:40 PST 2017


In version 5:

- ov5640: renamed "pwdn-gpios" to "powerdown-gpios"

- ov5640: add mutex lock around the subdev op entry points.

- ov5640: don't attempt to program the new mode in ov5640_set_fmt().
  Instead set a new flag, pending_mode_change, and program the new
  mode at s_stream() if flag is set.

- ov5640: implement [gs]_frame_interval. As part of that, create
  ov5640_try_frame_interval(), which is used by both [gs]_frame_interval
  and [gs]_parm.

- ov5640: don't attempt to set controls in ov5640_s_ctrl(), or at
  mode change, do it instead after first power-up.

- video-multiplexer: include link_validate in media_entity_operations.

- video-multiplexer: enforce that output pad frame interval must match
  input pad frame interval in vidsw_s_frame_interval().

- video-multiplexer: initialize frame interval to a default 30 fps.

- mipi csi-2: renamed "cfg" clock name property to "ref". This is the
  27 MHz mipi csi-2 PLL reference clock.

- mipi csi-2: create a hsfreq_map[] table based on
  https://community.nxp.com/docs/DOC-94312. Use it to select
  a hsfreqrange_sel value when programming the D-PHY, based on
  a max Mbps per lane. This is computed from the source subdev
  via V4L2_CID_LINK_FREQ control, and if the subdev doesn't implement
  that control, use a default hard-coded max Mbps per lane.

- added required ports property description to imx-media binding doc.

- removed event V4L2_EVENT_FRAME_TIMEOUT. On a frame timeout, which
  is always unrecoverable, call vb2_queue_error() instead.

- export the remaining custom events to V4L2_EVENT_FRAME_INTERVAL_ERROR
  and V4L2_EVENT_NEW_FRAME_BEFORE_EOF.

- vdic: use V4L2_CID_DEINTERLACING_MODE for motion compensation control
  instead of a custom control.

- add v4l2_subdev_link_validate_frame_interval(). Call this in the
  link_validate imx-media subdev callbacks and video-multiplexer.

- fix subdev event registration: implementation of subscribe_event()
  and unsubscribe_event() subdev ops were missing.

- all calls from the pipeline to the sensor subdev have been removed.
  Only the CSI subdev still refers to a sensor, and only to retrieve
  its media bus config, which is necessary to setup the CSI interface.

- add mutex locks around the imx-media subdev op entry points.

- completed the propagation of all pad format parameters from sink
  pads to source pads within every imx-media subdev.

- implement [gs]_frame_interval in all the imx-media subdevs.

- imx-ic-prpencvf: there isn't necessarily a CSI subdev in the pipeline
  in the future, so make sure this is optional when calling the CSI's
  FIM.

- the source pads that attach to capture device nodes now require the
  IPU internal pixel codes. The capture device translates these to
  v4l2 fourcc memory formats.

- fix control inheritance to the capture device. When the pipeline
  was modified, the inherited controls were not being refreshed.
  v4l2_pipeline_inherit_controls() is now called only in imx-media
  link_notify() callback when a pipelink link is disabled or modified.
  imx_media_find_pipeline_video_device() is created to locate the
  capture device in the pipeline.

- fix a possible race when propagating formats to the capture device.
  The subdevs and capture device use different mutex locks when setting
  formats. imx_media_capture_device_set_format() is created which acquires
  the capture device mutex when updating the capture device format.

- verify all subdevs were bound in the async completion callback.
 

Philipp Zabel (7):
  [media] dt-bindings: Add bindings for video-multiplexer device
  ARM: dts: imx6qdl: Add mipi_ipu1/2 multiplexers, mipi_csi, and their
    connections
  add mux and video interface bridge entity functions
  platform: add video-multiplexer subdevice driver
  media: imx: csi: fix crop rectangle changes in set_fmt
  media: imx: csi: add frame skipping support
  media: imx: csi: fix crop rectangle reset in sink set_fmt

Russell King (4):
  media: imx: add support for bayer formats
  media: imx: csi: add support for bayer formats
  media: imx: mipi-csi2: enable setting and getting of frame rates
  media: imx: csi/fim: add support for frame intervals

Steve Longerbeam (28):
  [media] dt-bindings: Add bindings for i.MX media driver
  [media] dt/bindings: Add bindings for OV5640
  ARM: dts: imx6qdl: Add compatible, clocks, irqs to MIPI CSI-2 node
  ARM: dts: imx6qdl: add capture-subsystem device
  ARM: dts: imx6qdl-sabrelite: remove erratum ERR006687 workaround
  ARM: dts: imx6-sabrelite: add OV5642 and OV5640 camera sensors
  ARM: dts: imx6-sabresd: add OV5642 and OV5640 camera sensors
  ARM: dts: imx6-sabreauto: create i2cmux for i2c3
  ARM: dts: imx6-sabreauto: add reset-gpios property for max7310_b
  ARM: dts: imx6-sabreauto: add pinctrl for gpt input capture
  ARM: dts: imx6-sabreauto: add the ADV7180 video decoder
  [media] v4l2: add a frame interval error event
  [media] v4l2: add a new-frame before end-of-frame event
  [media] v4l2-mc: add a function to inherit controls from a pipeline
  [media] v4l: subdev: Add function to validate frame interval
  [media] add Omnivision OV5640 sensor driver
  UAPI: Add media UAPI Kbuild file
  media: Add userspace header file for i.MX
  media: Add i.MX media core driver
  media: imx: Add Capture Device Interface
  media: imx: Add CSI subdev driver
  media: imx: Add VDIC subdev driver
  media: imx: Add IC subdev drivers
  media: imx: Add MIPI CSI-2 Receiver subdev driver
  ARM: imx_v6_v7_defconfig: Enable staging video4linux drivers
  media: imx: csi: add __csi_get_fmt
  media: imx: redo pixel format enumeration and negotiation
  media: imx: propagate sink pad formats to source pads

 .../devicetree/bindings/media/i2c/ov5640.txt       |   45 +
 Documentation/devicetree/bindings/media/imx.txt    |   74 +
 .../bindings/media/video-multiplexer.txt           |   59 +
 Documentation/media/uapi/mediactl/media-types.rst  |   22 +
 Documentation/media/uapi/v4l/vidioc-dqevent.rst    |   12 +
 Documentation/media/v4l-drivers/imx.rst            |  560 +++++
 Documentation/media/videodev2.h.rst.exceptions     |    2 +
 arch/arm/boot/dts/imx6dl-sabrelite.dts             |    5 +
 arch/arm/boot/dts/imx6dl-sabresd.dts               |    5 +
 arch/arm/boot/dts/imx6dl.dtsi                      |  185 ++
 arch/arm/boot/dts/imx6q-sabrelite.dts              |    5 +
 arch/arm/boot/dts/imx6q-sabresd.dts                |    5 +
 arch/arm/boot/dts/imx6q.dtsi                       |  121 ++
 arch/arm/boot/dts/imx6qdl-sabreauto.dtsi           |  144 +-
 arch/arm/boot/dts/imx6qdl-sabrelite.dtsi           |  152 +-
 arch/arm/boot/dts/imx6qdl-sabresd.dtsi             |  114 +-
 arch/arm/boot/dts/imx6qdl.dtsi                     |   17 +-
 arch/arm/configs/imx_v6_v7_defconfig               |   11 +
 drivers/media/i2c/Kconfig                          |    7 +
 drivers/media/i2c/Makefile                         |    1 +
 drivers/media/i2c/ov5640.c                         | 2231 ++++++++++++++++++++
 drivers/media/platform/Kconfig                     |    8 +
 drivers/media/platform/Makefile                    |    2 +
 drivers/media/platform/video-multiplexer.c         |  498 +++++
 drivers/media/v4l2-core/v4l2-mc.c                  |   48 +
 drivers/media/v4l2-core/v4l2-subdev.c              |   50 +
 drivers/staging/media/Kconfig                      |    2 +
 drivers/staging/media/Makefile                     |    1 +
 drivers/staging/media/imx/Kconfig                  |   20 +
 drivers/staging/media/imx/Makefile                 |   12 +
 drivers/staging/media/imx/TODO                     |   17 +
 drivers/staging/media/imx/imx-ic-common.c          |  113 +
 drivers/staging/media/imx/imx-ic-prp.c             |  497 +++++
 drivers/staging/media/imx/imx-ic-prpencvf.c        | 1236 +++++++++++
 drivers/staging/media/imx/imx-ic.h                 |   38 +
 drivers/staging/media/imx/imx-media-capture.c      |  694 ++++++
 drivers/staging/media/imx/imx-media-csi.c          | 1595 ++++++++++++++
 drivers/staging/media/imx/imx-media-dev.c          |  522 +++++
 drivers/staging/media/imx/imx-media-fim.c          |  463 ++++
 drivers/staging/media/imx/imx-media-internal-sd.c  |  349 +++
 drivers/staging/media/imx/imx-media-of.c           |  267 +++
 drivers/staging/media/imx/imx-media-utils.c        | 1009 +++++++++
 drivers/staging/media/imx/imx-media-vdic.c         |  949 +++++++++
 drivers/staging/media/imx/imx-media.h              |  311 +++
 drivers/staging/media/imx/imx6-mipi-csi2.c         |  725 +++++++
 include/media/imx.h                                |   15 +
 include/media/v4l2-mc.h                            |   25 +
 include/media/v4l2-subdev.h                        |   10 +
 include/uapi/Kbuild                                |    1 +
 include/uapi/linux/media.h                         |    6 +
 include/uapi/linux/v4l2-controls.h                 |    4 +
 include/uapi/linux/videodev2.h                     |    2 +
 include/uapi/media/Kbuild                          |    2 +
 include/uapi/media/imx.h                           |   21 +
 54 files changed, 13262 insertions(+), 27 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/ov5640.txt
 create mode 100644 Documentation/devicetree/bindings/media/imx.txt
 create mode 100644 Documentation/devicetree/bindings/media/video-multiplexer.txt
 create mode 100644 Documentation/media/v4l-drivers/imx.rst
 create mode 100644 drivers/media/i2c/ov5640.c
 create mode 100644 drivers/media/platform/video-multiplexer.c
 create mode 100644 drivers/staging/media/imx/Kconfig
 create mode 100644 drivers/staging/media/imx/Makefile
 create mode 100644 drivers/staging/media/imx/TODO
 create mode 100644 drivers/staging/media/imx/imx-ic-common.c
 create mode 100644 drivers/staging/media/imx/imx-ic-prp.c
 create mode 100644 drivers/staging/media/imx/imx-ic-prpencvf.c
 create mode 100644 drivers/staging/media/imx/imx-ic.h
 create mode 100644 drivers/staging/media/imx/imx-media-capture.c
 create mode 100644 drivers/staging/media/imx/imx-media-csi.c
 create mode 100644 drivers/staging/media/imx/imx-media-dev.c
 create mode 100644 drivers/staging/media/imx/imx-media-fim.c
 create mode 100644 drivers/staging/media/imx/imx-media-internal-sd.c
 create mode 100644 drivers/staging/media/imx/imx-media-of.c
 create mode 100644 drivers/staging/media/imx/imx-media-utils.c
 create mode 100644 drivers/staging/media/imx/imx-media-vdic.c
 create mode 100644 drivers/staging/media/imx/imx-media.h
 create mode 100644 drivers/staging/media/imx/imx6-mipi-csi2.c
 create mode 100644 include/media/imx.h
 create mode 100644 include/uapi/media/Kbuild
 create mode 100644 include/uapi/media/imx.h

-- 
2.7.4




More information about the linux-arm-kernel mailing list