[RESEND PATCH] arm: assabet_defconfig: disable IDE subsystem
Russell King - ARM Linux
linux at armlinux.org.uk
Thu Mar 9 07:08:29 PST 2017
On Thu, Mar 09, 2017 at 03:57:37PM +0100, Bartlomiej Zolnierkiewicz wrote:
> On Thursday, March 09, 2017 02:51:47 PM Russell King - ARM Linux wrote:
> > On Thu, Mar 09, 2017 at 03:42:49PM +0100, Bartlomiej Zolnierkiewicz wrote:
> > >
> > > Hi,
> > >
> > > On Thursday, March 09, 2017 01:57:15 PM Russell King - ARM Linux wrote:
> > > > On Thu, Mar 09, 2017 at 03:24:56PM +0300, Sergei Shtylyov wrote:
> > > > > On 03/09/2017 03:20 PM, Sekhar Nori wrote:
> > > > >
> > > > > >[...]
> > > > >
> > > > > >>>diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c
> > > > > >>>b/arch/arm/mach-davinci/board-dm644x-evm.c
> > > > > >>>index 023480b75244..60a1f23890cd 100644
> > > > > >>>--- a/arch/arm/mach-davinci/board-dm644x-evm.c
> > > > > >>>+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
> > > > > >>>@@ -744,7 +744,7 @@ static int davinci_phy_fixup(struct phy_device
> > > > > >>>*phydev)
> > > > > >>> return 0;
> > > > > >>> }
> > > > > >>>
> > > > > >>>-#define HAS_ATA IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710)
> > > > > >>>+#define HAS_ATA IS_ENABLED(CONFIG_PATA_BK3710)
> > > > > >>
> > > > > >> I think it would be more correct to check for both libata and IDE
> > > > > >>drivers here...
> > > > > >
> > > > > >As I understand, the plan is to remove the IDE driver soon.
> > > > >
> > > > > I'm not sure DaveM would support any removals in drivers/ide/. He has
> > > > > explicitly expressed his will to maintain the IDE driuver forever.
> > > >
> > > > As I keep saying, there are ARM machines where the IDE driver works but
> > > > the PATA driver doesn't. EBSA110's PCMCIA slots for instance.
> > >
> > > Please be more specific, I'll be happy to help with migrating this
> > > machines to libata PATA.
> > >
> > > BTW the example you're giving has never worked with the old IDE
> > > driver in the upstream kernel.
> >
> > That's where you are wrong. It worked for 10+ years with no
> > modifications in the upstream IDE driver or ide-cs driver - only the
> > patch I quoted was required.
>
> ..and the patch you quoted is in which upstream kernel version exactly?
I don't claim that it works with the upstream kernel as a whole. I claim
that it works with the ide-cs driver _unmodified_ in the upstream kernel,
but with a simple two line patch which is private to the ARM architecture.
Please pay attention to what I write, thanks.
--
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.
More information about the linux-arm-kernel
mailing list