[PATCH v2 0/8] thermal: ti-soc-thermal: Migrate slope/offset data to device tree
Keerthy
j-keerthy at ti.com
Thu Mar 9 00:05:54 PST 2017
Currently the slope and offset values for calculating the
hot spot temperature of a particular thermal zone is part
of driver data. Pass them here instead and obtain the values
while of node parsing.
Tested for the slope and constant values on DRA7-EVM, OMAP3-BEAGLE.
Changes in v2:
* Added OMAP3 changes along with DRA7/OMAP4/OMAP5.
Keerthy (8):
arm: dts: omap3: Add cpu_thermal zone
ARM: DRA7: Thermal: Add slope and offset values
ARM: OMAP5: Thermal: Add slope and offset values
ARM: OMAP443x: Thermal: Add slope and offset values
ARM: OMAP4460: Thermal: Add slope and offset values
thermal: ti-soc-thermal: Fetch slope and offset from DT
thermal: ti-soc-thermal: Remove redundant constants
thermal: ti-soc-thermal: Remove redundant code
arch/arm/boot/dts/dra7.dtsi | 17 +++
arch/arm/boot/dts/omap3-cpu-thermal.dtsi | 20 +++
arch/arm/boot/dts/omap34xx.dtsi | 8 +-
arch/arm/boot/dts/omap36xx.dtsi | 8 +-
arch/arm/boot/dts/omap443x.dtsi | 4 +
arch/arm/boot/dts/omap4460.dtsi | 4 +
arch/arm/boot/dts/omap5.dtsi | 9 ++
.../thermal/ti-soc-thermal/dra752-thermal-data.c | 10 --
.../thermal/ti-soc-thermal/omap3-thermal-data.c | 4 -
.../thermal/ti-soc-thermal/omap4-thermal-data.c | 6 -
.../thermal/ti-soc-thermal/omap5-thermal-data.c | 4 -
drivers/thermal/ti-soc-thermal/ti-bandgap.h | 4 -
drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 158 +--------------------
drivers/thermal/ti-soc-thermal/ti-thermal.h | 16 ---
14 files changed, 71 insertions(+), 201 deletions(-)
create mode 100644 arch/arm/boot/dts/omap3-cpu-thermal.dtsi
--
1.9.1
More information about the linux-arm-kernel
mailing list