i.MX7 pinctrl driver writing to non existent registers

Sascha Hauer s.hauer at pengutronix.de
Wed Mar 8 23:21:30 PST 2017


On Wed, Mar 08, 2017 at 02:57:53PM +0100, Shawn Guo wrote:
> On Wed, Feb 08, 2017 at 10:08:17AM +0100, Sascha Hauer wrote:
> > Hi All,
> > 
> > The i.MX7 has two pinmux controllers, the LPSR and the regular one. We
> > instantiate a driver for each one. Now the driver assumes that the pins
> > are completely configured with one iomux controller, but for the LPSR
> > pins this is not true: The MUX_CTL and PAD_CTL registers are indeed
> > in the LPSR controller, but the SELECT_INPUT registers for the same
> > pin are found in the regular controller.
> > 
> > The result is that with this pin for example:
> > 
> > #define MX7D_PAD_GPIO1_IO06__UART5_DCE_RX                         0x0018 0x0048 0x0714 0x3 0x4
> > 
> > The LPSR controller writes to LPSR_BASE + 0x714 where it should really
> > be IOMUX_BASE + 0x714.
> 
> Isn't property fsl,input-sel being there for addressing that?

Indeed, I have overlooked that. Sorry for the noise.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |



More information about the linux-arm-kernel mailing list