[RESEND PATCH v3 6/7] PCI: dwc: designware: Move _unroll configurations to a separate function
Kishon Vijay Abraham I
kishon at ti.com
Wed Mar 8 22:39:04 PST 2017
No functional change. Rename dw_pcie_writel_unroll/dw_pcie_readl_unroll
to dw_pcie_writel_ob_unroll/dw_pcie_readl_ob_unroll respectively as these
functions are used to perform only outbound configurations. Also move
these _unroll configurations to a separate function.
Signed-off-by: Kishon Vijay Abraham I <kishon at ti.com>
---
drivers/pci/dwc/pcie-designware.c | 112 ++++++++++++++++++++++---------------
1 file changed, 67 insertions(+), 45 deletions(-)
diff --git a/drivers/pci/dwc/pcie-designware.c b/drivers/pci/dwc/pcie-designware.c
index 557ee53..6657a84 100644
--- a/drivers/pci/dwc/pcie-designware.c
+++ b/drivers/pci/dwc/pcie-designware.c
@@ -92,22 +92,64 @@ void dw_pcie_write_dbi(struct dw_pcie *pci, void __iomem *base, u32 reg,
dev_err(pci->dev, "write DBI address failed\n");
}
-static u32 dw_pcie_readl_unroll(struct dw_pcie *pci, void __iomem *base,
- u32 index, u32 reg)
+static u32 dw_pcie_readl_ob_unroll(struct dw_pcie *pci, void __iomem *base,
+ u32 index, u32 reg)
{
u32 offset = PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(index);
return dw_pcie_read_dbi(pci, base, offset + reg, 0x4);
}
-static void dw_pcie_writel_unroll(struct dw_pcie *pci, void __iomem *base,
- u32 index, u32 reg, u32 val)
+static void dw_pcie_writel_ob_unroll(struct dw_pcie *pci, void __iomem *base,
+ u32 index, u32 reg, u32 val)
{
u32 offset = PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(index);
dw_pcie_write_dbi(pci, base, offset + reg, 0x4, val);
}
+void dw_pcie_prog_outbound_atu_unroll(struct dw_pcie *pci, int index, int type,
+ u64 cpu_addr, u64 pci_addr, u32 size)
+{
+ u32 retries, val;
+ void __iomem *base = pci->dbi_base;
+
+ dw_pcie_writel_ob_unroll(pci, base, index,
+ PCIE_ATU_UNR_LOWER_BASE,
+ lower_32_bits(cpu_addr));
+ dw_pcie_writel_ob_unroll(pci, base, index,
+ PCIE_ATU_UNR_UPPER_BASE,
+ upper_32_bits(cpu_addr));
+ dw_pcie_writel_ob_unroll(pci, base, index, PCIE_ATU_UNR_LIMIT,
+ lower_32_bits(cpu_addr + size - 1));
+ dw_pcie_writel_ob_unroll(pci, base, index,
+ PCIE_ATU_UNR_LOWER_TARGET,
+ lower_32_bits(pci_addr));
+ dw_pcie_writel_ob_unroll(pci, base, index,
+ PCIE_ATU_UNR_UPPER_TARGET,
+ upper_32_bits(pci_addr));
+ dw_pcie_writel_ob_unroll(pci, base, index,
+ PCIE_ATU_UNR_REGION_CTRL1,
+ type);
+ dw_pcie_writel_ob_unroll(pci, base, index,
+ PCIE_ATU_UNR_REGION_CTRL2,
+ PCIE_ATU_ENABLE);
+
+ /*
+ * Make sure ATU enable takes effect before any subsequent config
+ * and I/O accesses.
+ */
+ for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++) {
+ val = dw_pcie_readl_ob_unroll(pci, base, index,
+ PCIE_ATU_UNR_REGION_CTRL2);
+ if (val & PCIE_ATU_ENABLE)
+ return;
+
+ usleep_range(LINK_WAIT_IATU_MIN, LINK_WAIT_IATU_MAX);
+ }
+ dev_err(pci->dev, "outbound iATU is not being enabled\n");
+}
+
void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index, int type,
u64 cpu_addr, u64 pci_addr, u32 size)
{
@@ -118,59 +160,39 @@ void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index, int type,
cpu_addr = pci->ops->cpu_addr_fixup(cpu_addr);
if (pci->iatu_unroll_enabled) {
- dw_pcie_writel_unroll(pci, base, index, PCIE_ATU_UNR_LOWER_BASE,
- lower_32_bits(cpu_addr));
- dw_pcie_writel_unroll(pci, base, index, PCIE_ATU_UNR_UPPER_BASE,
- upper_32_bits(cpu_addr));
- dw_pcie_writel_unroll(pci, base, index, PCIE_ATU_UNR_LIMIT,
- lower_32_bits(cpu_addr + size - 1));
- dw_pcie_writel_unroll(pci, base, index,
- PCIE_ATU_UNR_LOWER_TARGET,
- lower_32_bits(pci_addr));
- dw_pcie_writel_unroll(pci, base, index,
- PCIE_ATU_UNR_UPPER_TARGET,
- upper_32_bits(pci_addr));
- dw_pcie_writel_unroll(pci, base, index,
- PCIE_ATU_UNR_REGION_CTRL1,
- type);
- dw_pcie_writel_unroll(pci, base, index,
- PCIE_ATU_UNR_REGION_CTRL2,
- PCIE_ATU_ENABLE);
- } else {
- dw_pcie_write_dbi(pci, base, PCIE_ATU_VIEWPORT, 0x4,
- PCIE_ATU_REGION_OUTBOUND | index);
- dw_pcie_write_dbi(pci, base, PCIE_ATU_LOWER_BASE, 0x4,
- lower_32_bits(cpu_addr));
- dw_pcie_write_dbi(pci, base, PCIE_ATU_UPPER_BASE, 0x4,
- upper_32_bits(cpu_addr));
- dw_pcie_write_dbi(pci, base, PCIE_ATU_LIMIT, 0x4,
- lower_32_bits(cpu_addr + size - 1));
- dw_pcie_write_dbi(pci, base, PCIE_ATU_LOWER_TARGET, 0x4,
- lower_32_bits(pci_addr));
- dw_pcie_write_dbi(pci, base, PCIE_ATU_UPPER_TARGET, 0x4,
- upper_32_bits(pci_addr));
- dw_pcie_write_dbi(pci, base, PCIE_ATU_CR1, 0x4, type);
- dw_pcie_write_dbi(pci, base, PCIE_ATU_CR2, 0x4,
- PCIE_ATU_ENABLE);
+ dw_pcie_prog_outbound_atu_unroll(pci, index, type, cpu_addr,
+ pci_addr, size);
+ return;
}
+ dw_pcie_write_dbi(pci, base, PCIE_ATU_VIEWPORT, 0x4,
+ PCIE_ATU_REGION_OUTBOUND | index);
+ dw_pcie_write_dbi(pci, base, PCIE_ATU_LOWER_BASE, 0x4,
+ lower_32_bits(cpu_addr));
+ dw_pcie_write_dbi(pci, base, PCIE_ATU_UPPER_BASE, 0x4,
+ upper_32_bits(cpu_addr));
+ dw_pcie_write_dbi(pci, base, PCIE_ATU_LIMIT, 0x4,
+ lower_32_bits(cpu_addr + size - 1));
+ dw_pcie_write_dbi(pci, base, PCIE_ATU_LOWER_TARGET, 0x4,
+ lower_32_bits(pci_addr));
+ dw_pcie_write_dbi(pci, base, PCIE_ATU_UPPER_TARGET, 0x4,
+ upper_32_bits(pci_addr));
+ dw_pcie_write_dbi(pci, base, PCIE_ATU_CR1, 0x4, type);
+ dw_pcie_write_dbi(pci, base, PCIE_ATU_CR2, 0x4,
+ PCIE_ATU_ENABLE);
+
/*
* Make sure ATU enable takes effect before any subsequent config
* and I/O accesses.
*/
for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++) {
- if (pci->iatu_unroll_enabled)
- val = dw_pcie_readl_unroll(pci, base, index,
- PCIE_ATU_UNR_REGION_CTRL2);
- else
- val = dw_pcie_read_dbi(pci, base, PCIE_ATU_CR2, 0x4);
-
+ val = dw_pcie_read_dbi(pci, base, PCIE_ATU_CR2, 0x4);
if (val == PCIE_ATU_ENABLE)
return;
usleep_range(LINK_WAIT_IATU_MIN, LINK_WAIT_IATU_MAX);
}
- dev_err(pci->dev, "iATU is not being enabled\n");
+ dev_err(pci->dev, "outbound iATU is not being enabled\n");
}
int dw_pcie_wait_for_link(struct dw_pcie *pci)
--
1.7.9.5
More information about the linux-arm-kernel
mailing list