[PATCH] ARM64: dts: meson-gxbb-odroidc2: enable USB Host Nodes
Anand Moon
linux.amoon at gmail.com
Wed Mar 8 09:22:32 PST 2017
Hi All,
On 8 March 2017 at 02:06, Anand Moon <linux.amoon at gmail.com> wrote:
> From: Anand Moon <linux.amoon at gmail.com>
>
> update the regulator supply nodes for usb host to
> enable usb host on odroid-c2
>
> Signed-off-by: Anand Moon <linux.amoon at gmail.com>
> ---
> root at odroid64:/usr/src/odroidxu3-4.y-devel# lsusb -t
> /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=dwc2/1p, 480M
> |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
> |__ Port 1: Dev 3, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
> |__ Port 1: Dev 3, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M
> |__ Port 2: Dev 4, If 0, Class=Mass Storage, Driver=usb-storage, 480M
> |__ Port 4: Dev 5, If 0, Class=Mass Storage, Driver=usb-storage, 480M
> ---
> arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
> index c59403a..304b676 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
> @@ -64,6 +64,18 @@
> reg = <0x0 0x0 0x0 0x80000000>;
> };
>
> + usb_host_pwr: regulator-usb-pwrs {
> + compatible = "regulator-fixed";
> +
> + regulator-name = "USB_HOST_PWR";
> +
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> +
> + gpio = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + };
> +
> usb_otg_pwr: regulator-usb-pwrs {
> compatible = "regulator-fixed";
>
> @@ -184,6 +196,7 @@
>
> &usb1_phy {
> status = "okay";
> + phy-supply = <&usb_host_pwr>;
> };
>
> &usb0 {
> --
> 2.7.4
>
Please ignore this patch, It not working.
I will try to submit a new patch.
Best Regards
-Anand Moon
More information about the linux-arm-kernel
mailing list