[PATCH v2 08/22] PCI: dwc: designware: Add EP mode support

[Joao Pinto]

Às 3:32 PM de 3/8/2017, Joao Pinto escreveu:
> Às 1:31 PM de 3/8/2017, Kishon Vijay Abraham I escreveu:
>> Hi,
>>
>> On Wednesday 08 March 2017 05:07 PM, Joao Pinto wrote:
>>> Às 11:35 AM de 3/8/2017, Kishon Vijay Abraham I escreveu:
>>>> Hi,
>>>>
>>>> On Wednesday 08 March 2017 05:02 PM, Joao Pinto wrote:
>>>>>
>>>>> Hi Kishon,
>>>>>
>>>>>>> Can you provide PCIE_GET_ATU_INB_UNR_REG_OFFSET (similar to
>>>>>>> PCIE_GET_ATU_OUTB_UNR_REG_OFFSET)?
>>>>>>
>>>>>> Yes of course, I will send you the definition soon.
>>>>>
>>>>> As promissed here is the definition for Inbound:
>>>>>
>>>>> +/* register address builder */
>>>>> +#define PCIE_GET_ATU_INB_UNR_REG_ADDR(region, register)		\
>>>>> +					((0x3 << 20) | (region << 9) |	\
>>>>> +					(0x1 << 8) | (register << 2))
>>>>
>>>> Cool, thanks!
>>>
>>> No problem! If you have doubts, please let me know.
>>
>> Okay, so this looks slightly different than the outbound macro since it takes
>> the register argument. In the case of outbound PCIE_GET_ATU_OUTB_UNR_REG_OFFSET
>> returns the offset which was used like
>> dw_pcie_write_dbi(pci, base, offset + reg, 0x4, val);
>>
>> How should the value from PCIE_GET_ATU_INB_UNR_REG_ADDR be used?
> 
> My original way was this one:
> 
> +/* Register address builder */
> +#define PCIE_GET_ATU_OUTB_UNR_REG_ADDR(region, register)		\
> +					((0x3 << 20) | (region << 9) |	\
> +					(register << 2))
> 
> Bjorn then converted to offset:
> 
> #define PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(region)  ((0x3 << 20) | (region << 9))
> 
> and applied the <<2 shift to the ATU registers.
> 
> So you can use:
> 
> #define PCIE_GET_ATU_INB_UNR_REG_ADDR(region, register)		\
> 					((0x3 << 20) | (region << 9) |	\
> 					(0x1 << 8)
> 

This one has the right name :)

#define PCIE_GET_ATU_INB_UNR_REG_OFFSET(region, register)		\
					((0x3 << 20) | (region << 9) |	\
					(0x1 << 8)


> Thanks.
> 
>>
>> Thanks
>> Kishon
>>
>