[PATCH v2 3/3] ARM64: dts: meson-gx: Add MALI nodes for GXBB and GXL

Kevin Hilman khilman at baylibre.com
Mon Mar 6 09:27:47 PST 2017


Neil Armstrong <narmstrong at baylibre.com> writes:

> On 03/04/2017 01:38 PM, Andreas Färber wrote:
>> Am 03.03.2017 um 20:29 schrieb Kevin Hilman:
>>> Neil Armstrong <narmstrong at baylibre.com> writes:
>>>> On 03/02/2017 01:31 PM, Andreas Färber wrote:
>>>>> Am 01.03.2017 um 11:46 schrieb Neil Armstrong:
>>>>>> The same MALI-450 MP3 GPU is present in the GXBB and GXL SoCs.
>> [...]
>>>>>> The node is simply added in the meson-gxbb.dtsi file.
>> [...]
>>>>>> For GXL, since a lot is shared with the GXM that has a MALI-T820 IP, this
>>>>>> patch adds a new meson-gxl-mali.dtsi and is included in the SoC specific
>>>>>> dtsi files.
>>>>>
>>>>> This part is slightly confusing though.
>>>>>
>>>>> What exactly is the GXL vs. GXM difference that this can't be handled by
>>>>> overriding node properties compatible/interrupts/clocks? I am missing a
>>>>> GXM patch in this series as rationale for doing it this way.
>>>>>
>>>>> In particular I am wondering whether the whole GXM-inherits-from-GXL
>>>>> concept is flawed and should be adjusted if this leads to secondary
>>>>> .dtsi files like this: My proposal would be to instead create a
>>>>> meson-gxl-gxm.dtsi, that meson-gxl.dtsi and meson-gxm.dtsi can inherit
>>>>> the current common parts from, then the Mali bits can simply go into
>>>>> meson-gxl.dtsi without extra #includes needed in S905X and S905D. While
>>>>> it's slightly more work to split once again, I think it would be cleaner.
>> [...]
>>>> The only changes are :
>> [...]
>>>>  - A different Mali core, but with the same interrupts (less but they share the same lower interrupts), clocks and memory space
>>>>
>>>> This is why it was decided to have a sub-dtsi, having a secondary dtsi will simply copy 99% of the GXL dtsi,
>>>> but surely we could also have an intermediate dtsi but for boards I'm ok with it, but less for a SoC dtsi,
>>>> since it could lead to some confusion.
>>>>
>>>> Finally, yes I could have added the mali node to the GXL dtsi, but the midgard Mali dt-bindings are not upstream
>>>> and the family is too big and recent enough to consider having stable bindings for now.
>>>>
>>>> Nevertheless, nothing is final, this gxl-mali.dtsi could be merged into the GXL dtsi in the future when we
>>>> have proper dt-bindings and a real support of the T820 Mali on the S912.
>>>>
>>>> Kevin, what's your thought about this ?
>>>
>>> I don't have a strong preference.  I'm OK with a separate Mali .dtsi due
>>> to the signficant overlap between GXL/GXM in terms of clocks, interrupts
>>> etc.
>>>
>>> However, if the plan is to #include this from GXM .dts files, whould a
>>> better name be meson-gx-mali.dtsi?
>> 
>> I thought the purpose was specifically to not have GXM include it
>> because it uses a Midgard IP.
>> 
>> If you want to share the fragment with GXBB too (gx), we should rather
>> use meson-gx-mali-utgard.dtsi, which would differentiate from GXM's
>> Midgard while still allowing for variation on the 4xx side (e.g., 470).
>> 
>> Regards,
>> Andreas
>> 
>
> Exact, there is no plan to include it from GXM.
>
> I'm not fan of having meson-gx-mali-utgard.dtsi, we should still need some attributes additions for
> the clocks to the mali node in the gxbb dtsi and each s905x and s905d dtsi files.
> I'm not sure this is even cleaner...

OK, I misunderstood the intent of having it separated from out from the
GXL .dsti then.  Could you please clarify?

Kevin






More information about the linux-arm-kernel mailing list