[RESEND PATCH v3 7/8] arm64: dts: mt8173: move clock from phy node into port nodes
Chunfeng Yun
chunfeng.yun at mediatek.com
Mon Mar 6 05:49:28 PST 2017
there is a reference clock for each port, HighSpeed port is 48M,
and SuperSpeed port is 26M which usually comes from 26M oscillator
directly, but some SoCs is not. it is flexible to move it into port
node.
Signed-off-by: Chunfeng Yun <chunfeng.yun at mediatek.com>
---
arch/arm64/boot/dts/mediatek/mt8173.dtsi | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 1dc4629..1c9e0d5 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -764,8 +764,6 @@
u3phy: usb-phy at 11290000 {
compatible = "mediatek,mt8173-u3phy";
reg = <0 0x11290000 0 0x800>;
- clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>;
- clock-names = "u3phya_ref";
#address-cells = <2>;
#size-cells = <2>;
ranges;
@@ -773,18 +771,24 @@
u2port0: usb-phy at 11290800 {
reg = <0 0x11290800 0 0x100>;
+ clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>;
+ clock-names = "ref";
#phy-cells = <1>;
status = "okay";
};
u3port0: usb-phy at 11290900 {
reg = <0 0x11290900 0 0x700>;
+ clocks = <&clk26m>;
+ clock-names = "ref";
#phy-cells = <1>;
status = "okay";
};
u2port1: usb-phy at 11291000 {
reg = <0 0x11291000 0 0x100>;
+ clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>;
+ clock-names = "ref";
#phy-cells = <1>;
status = "okay";
};
--
1.7.9.5
More information about the linux-arm-kernel
mailing list