[PATCH 1/2] ARM: dts: aspeed: add SPI controller bindings
Cédric Le Goater
clg at kaod.org
Sun Mar 5 23:35:52 PST 2017
On 03/06/2017 12:13 AM, Joel Stanley wrote:
> Hi Cedric,
>
> On Thu, Mar 2, 2017 at 12:56 AM, Cédric Le Goater <clg at kaod.org> wrote:
>> Let's define the SPI controllers in the Aspeed SoCs AST2500 and
>> AST2400 and also enable these, as well as the chips, on the associated
>> platforms.
>
> Thanks for this. Was there a reason you didn't modify the romulus dts as well?
Mostly because this is a pre-romulus patch that I refreshed.
I will send a extra patch for the romulus platform.
Thanks,
C.
> Cheers,
>
> Joel
>
>>
>> Signed-off-by: Cédric Le Goater <clg at kaod.org>
>> ---
>> arch/arm/boot/dts/aspeed-ast2500-evb.dts | 20 +++++++++
>> arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts | 16 +++++++
>> arch/arm/boot/dts/aspeed-g4.dtsi | 29 ++++++++++++
>> arch/arm/boot/dts/aspeed-g5.dtsi | 63 +++++++++++++++++++++++++++
>> 4 files changed, 128 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/aspeed-ast2500-evb.dts b/arch/arm/boot/dts/aspeed-ast2500-evb.dts
>> index d967603dade8..8f82e8ab1875 100644
>> --- a/arch/arm/boot/dts/aspeed-ast2500-evb.dts
>> +++ b/arch/arm/boot/dts/aspeed-ast2500-evb.dts
>> @@ -20,6 +20,26 @@
>> };
>> };
>>
>> +&fmc {
>> + status = "okay";
>> + flash at 0 {
>> + status = "okay";
>> + label = "bmc";
>> + };
>> +};
>> +
>> +&spi1 {
>> + status = "okay";
>> + flash at 0 {
>> + status = "okay";
>> + label = "pnor";
>> + };
>> +};
>> +
>> +&spi2 {
>> + status = "okay";
>> +};
>> +
>> &uart5 {
>> status = "okay";
>> };
>> diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
>> index 1d2fc1e1dc29..aab1889f702f 100644
>> --- a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
>> +++ b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
>> @@ -31,6 +31,22 @@
>> };
>> };
>>
>> +&fmc {
>> + status = "okay";
>> + flash at 0 {
>> + status = "okay";
>> + label = "bmc";
>> + };
>> +};
>> +
>> +&spi {
>> + status = "okay";
>> + flash at 0 {
>> + status = "okay";
>> + label = "pnor";
>> + };
>> +};
>> +
>> &uart5 {
>> status = "okay";
>> };
>> diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
>> index 0b4932cc02a8..7ef6442d0ade 100644
>> --- a/arch/arm/boot/dts/aspeed-g4.dtsi
>> +++ b/arch/arm/boot/dts/aspeed-g4.dtsi
>> @@ -33,6 +33,35 @@
>> #size-cells = <1>;
>> ranges;
>>
>> + fmc: flash-controller at 1e620000 {
>> + reg = < 0x1e620000 0x94
>> + 0x20000000 0x02000000 >;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + compatible = "aspeed,ast2400-fmc";
>> + status = "disabled";
>> + interrupts = <19>;
>> + flash at 0 {
>> + reg = < 0 >;
>> + compatible = "jedec,spi-nor";
>> + status = "disabled";
>> + };
>> + };
>> +
>> + spi: flash-controller at 1e630000 {
>> + reg = < 0x1e630000 0x18
>> + 0x30000000 0x02000000 >;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + compatible = "aspeed,ast2400-spi";
>> + status = "disabled";
>> + flash at 0 {
>> + reg = < 0 >;
>> + compatible = "jedec,spi-nor";
>> + status = "disabled";
>> + };
>> + };
>> +
>> vic: interrupt-controller at 1e6c0080 {
>> compatible = "aspeed,ast2400-vic";
>> interrupt-controller;
>> diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
>> index b664fe380936..8970f3cb8e2b 100644
>> --- a/arch/arm/boot/dts/aspeed-g5.dtsi
>> +++ b/arch/arm/boot/dts/aspeed-g5.dtsi
>> @@ -24,6 +24,69 @@
>> #size-cells = <1>;
>> ranges;
>>
>> + fmc: flash-controller at 1e620000 {
>> + reg = < 0x1e620000 0xc4
>> + 0x20000000 0x10000000 >;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + compatible = "aspeed,ast2500-fmc";
>> + status = "disabled";
>> + interrupts = <19>;
>> + flash at 0 {
>> + reg = < 0 >;
>> + compatible = "jedec,spi-nor";
>> + status = "disabled";
>> + };
>> + flash at 1 {
>> + reg = < 1 >;
>> + compatible = "jedec,spi-nor";
>> + status = "disabled";
>> + };
>> + flash at 2 {
>> + reg = < 2 >;
>> + compatible = "jedec,spi-nor";
>> + status = "disabled";
>> + };
>> + };
>> +
>> + spi1: flash-controller at 1e630000 {
>> + reg = < 0x1e630000 0xc4
>> + 0x30000000 0x08000000 >;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + compatible = "aspeed,ast2500-spi";
>> + status = "disabled";
>> + flash at 0 {
>> + reg = < 0 >;
>> + compatible = "jedec,spi-nor";
>> + status = "disabled";
>> + };
>> + flash at 1 {
>> + reg = < 1 >;
>> + compatible = "jedec,spi-nor";
>> + status = "disabled";
>> + };
>> + };
>> +
>> + spi2: flash-controller at 1e631000 {
>> + reg = < 0x1e631000 0xc4
>> + 0x38000000 0x08000000 >;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + compatible = "aspeed,ast2500-spi";
>> + status = "disabled";
>> + flash at 0 {
>> + reg = < 0 >;
>> + compatible = "jedec,spi-nor";
>> + status = "disabled";
>> + };
>> + flash at 1 {
>> + reg = < 1 >;
>> + compatible = "jedec,spi-nor";
>> + status = "disabled";
>> + };
>> + };
>> +
>> vic: interrupt-controller at 1e6c0080 {
>> compatible = "aspeed,ast2400-vic";
>> interrupt-controller;
>> --
>> 2.7.4
>>
More information about the linux-arm-kernel
mailing list