[PATCH V5 6/6] ARM64: dts: Define CPU power domain for MSM8916

[Lina Iyer]

Define power domain and the power states for the domain as defined by
the PSCI firmware. The 8916 firmware supports OS initiated method of
powering off the CPU clusters.

Cc: <devicetree at vger.kernel.org>
Signed-off-by: Lina Iyer <lina.iyer at linaro.org>
---
 arch/arm64/boot/dts/qcom/msm8916.dtsi | 53 ++++++++++++++++++++++++++++++++---
 1 file changed, 49 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index f8ff327..ba60276 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -103,7 +103,7 @@
 			reg = <0x0>;
 			next-level-cache = <&L2_0>;
 			enable-method = "psci";
-			cpu-idle-states = <&CPU_SPC>;
+			power-domains = <&CPU_PD0>;
 		};
 
 		CPU1: cpu at 1 {
@@ -112,7 +112,7 @@
 			reg = <0x1>;
 			next-level-cache = <&L2_0>;
 			enable-method = "psci";
-			cpu-idle-states = <&CPU_SPC>;
+			power-domains = <&CPU_PD1>;
 		};
 
 		CPU2: cpu at 2 {
@@ -121,7 +121,7 @@
 			reg = <0x2>;
 			next-level-cache = <&L2_0>;
 			enable-method = "psci";
-			cpu-idle-states = <&CPU_SPC>;
+			power-domains = <&CPU_PD2>;
 		};
 
 		CPU3: cpu at 3 {
@@ -130,7 +130,7 @@
 			reg = <0x3>;
 			next-level-cache = <&L2_0>;
 			enable-method = "psci";
-			cpu-idle-states = <&CPU_SPC>;
+			power-domains = <&CPU_PD3>;
 		};
 
 		L2_0: l2-cache {
@@ -147,12 +147,57 @@
 				min-residency-us = <2000>;
 				local-timer-stop;
 			};
+
+			CLUSTER_RET: cluster_retention {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x1000010>;
+				entry-latency-us = <500>;
+				exit-latency-us = <500>;
+				min-residency-us = <2000>;
+			};
+
+			CLUSTER_PWR_DWN: cluster_gdhs {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x1000030>;
+				entry-latency-us = <2000>;
+				exit-latency-us = <2000>;
+				min-residency-us = <6000>;
+			};
 		};
 	};
 
 	psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";
+
+		CPU_PD0: cpu-pd at 0 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&CPU_SPC>;
+		};
+
+		CPU_PD1: cpu-pd at 1 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&CPU_SPC>;
+		};
+
+		CPU_PD2: cpu-pd at 2 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&CPU_SPC>;
+		};
+
+		CPU_PD3: cpu-pd at 3 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&CPU_SPC>;
+		};
+
+		CLUSTER_PD: cluster_pd {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_RET>, <&CLUSTER_PWR_DWN>;
+		};
 	};
 
 	pmu {
-- 
2.7.4