[PATCH 2/4] tty/serial: atmel: remove uneeded IS_ERR_OR_NULL calls
Richard Genoud
richard.genoud at gmail.com
Fri Mar 3 06:17:02 PST 2017
Since commit 1d267ea6539f ("serial: mctrl-gpio: simplify init routine"),
the mctrl_gpio_to_gpiod() function can't return an error anymore.
So, just testing for a NULL pointer is ok.
Signed-off-by: Richard Genoud <richard.genoud at gmail.com>
---
drivers/tty/serial/atmel_serial.c | 12 ++++--------
1 file changed, 4 insertions(+), 8 deletions(-)
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index ad6c2bdea481..e0f1955b3c7e 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -315,32 +315,28 @@ static unsigned int atmel_get_lines_status(struct uart_port *port)
mctrl_gpio_get(atmel_port->gpios, &ret);
- if (!IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(atmel_port->gpios,
- UART_GPIO_CTS))) {
+ if (mctrl_gpio_to_gpiod(atmel_port->gpios, UART_GPIO_CTS)) {
if (ret & TIOCM_CTS)
status &= ~ATMEL_US_CTS;
else
status |= ATMEL_US_CTS;
}
- if (!IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(atmel_port->gpios,
- UART_GPIO_DSR))) {
+ if (mctrl_gpio_to_gpiod(atmel_port->gpios, UART_GPIO_DSR)) {
if (ret & TIOCM_DSR)
status &= ~ATMEL_US_DSR;
else
status |= ATMEL_US_DSR;
}
- if (!IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(atmel_port->gpios,
- UART_GPIO_RI))) {
+ if (mctrl_gpio_to_gpiod(atmel_port->gpios, UART_GPIO_RI)) {
if (ret & TIOCM_RI)
status &= ~ATMEL_US_RI;
else
status |= ATMEL_US_RI;
}
- if (!IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(atmel_port->gpios,
- UART_GPIO_DCD))) {
+ if (mctrl_gpio_to_gpiod(atmel_port->gpios, UART_GPIO_DCD)) {
if (ret & TIOCM_CD)
status &= ~ATMEL_US_DCD;
else
More information about the linux-arm-kernel
mailing list