[PATCH V2] PCI/ASPM: reconfigure ASPM following hotplug for POLICY_DEFAULT

[Patel, Mayurkumar]

Hi Kaya

>
>Hi Mayurkumar
>
>On 3/2/2017 11:05 AM, Patel, Mayurkumar wrote:
>>>
>>> Hi Bjorn,
>>>
>>> On 2/28/2017 1:57 PM, Patel, Mayurkumar wrote:
>>>>> I was trying to figure out when to use saved values vs. the values in
>>>>> registers by looking at the enable_cnt.
>>>>> enable_cnt is 0 during boot on my system.
>>>> enable_cnt for the root port on my system is set to 1 for "root port" already without saving
>>>> any ASPM related settings.
>>>>
>>>>
>>>
>>> What would be the best way to figure out when to save power-on values from
>>> the registers?
>>>
>>
>> I can upload the diffs) because enable_cnt in pci_enable_device() can be triggered
>> from multiple places at boot time so it might not be safe to use it?
>
>Go ahead and share your diff. It doesn't hurt to look at other alternatives.
>

So basically, I introduced a new atomic variable to save the aspm_policy for the first time.
Below is my diff.

diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index 3dd8bcb..c8e1e3a 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -338,8 +338,9 @@ static void pcie_aspm_check_latency(struct pci_dev *endpoint)
        }
 }

-static void pcie_aspm_cap_init(struct pcie_link_state *link, int blacklist)
+static void pcie_aspm_cap_init(struct pci_dev *pdev, int blacklist)
 {
+       struct pcie_link_state *link = pdev->link_state;
        struct pci_dev *child, *parent = link->pdev;
        struct pci_bus *linkbus = parent->subordinate;
        struct aspm_register_info upreg, dwreg;
@@ -397,8 +398,21 @@ static void pcie_aspm_cap_init(struct pcie_link_state *link, int blacklist)
        link->latency_up.l1 = calc_l1_latency(upreg.latency_encoding_l1);
        link->latency_dw.l1 = calc_l1_latency(dwreg.latency_encoding_l1);

-       /* Save default state */
-       link->aspm_default = link->aspm_enabled;
+       /*
+        * Save default state from FW when enabling ASPM for the first time
+        * during boot by looking at the calculated link->aspm_enabled bits
+        * above and aspm_enable_cnt will be zero.
+        *
+        * If this path is getting called for the second/third time
+        * (aspm_enable_cnt will be non-zero). Assume that the current state
+        * of the ASPM registers may not necessarily match what FW asked us to
+        * do as in the case of hotplug insertion/removal.
+        */
+       if (atomic_inc_return(&pdev->aspm_enable_cnt) == 1)
+               pdev->aspm_default = link->aspm_default = link->aspm_enabled;
+       else
+               link->aspm_default = pdev->aspm_default;
+

        /* Setup initial capable state. Will be updated later */
        link->aspm_capable = link->aspm_support;
@@ -606,7 +620,7 @@ void pcie_aspm_init_link_state(struct pci_dev *pdev)
         * upstream links also because capable state of them can be
         * update through pcie_aspm_cap_init().
         */
-       pcie_aspm_cap_init(link, blacklist);
+      pcie_aspm_cap_init(pdev, blacklist);

        /* Setup initial Clock PM state */
        pcie_clkpm_cap_init(link, blacklist);
diff --git a/include/linux/pci.h b/include/linux/pci.h
index e2d1a12..aa7bd7e 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -321,6 +321,8 @@ struct pci_dev {

 #ifdef CONFIG_PCIEASPM
         struct pcie_link_state  *link_state;    /* ASPM link state */
+       unsigned int    aspm_default;           /* ASPM policy set by BIOS */
+       atomic_t        aspm_enable_cnt;        /* ASPM policy initialization */
 #endif

        pci_channel_state_t error_state;        /* current connectivity state */


>>
>> @Kaya/Bjorn: Do you have any other suggestions or Could you also please help by comment what would make sense?
>>
>>
>>> --
>>> Sinan Kaya
>>> Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm Technologies, Inc.
>>> Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project.
>> Intel Deutschland GmbH
>> Registered Address: Am Campeon 10-12, 85579 Neubiberg, Germany
>> Tel: +49 89 99 8853-0, www.intel.de
>> Managing Directors: Christin Eisenschmid, Christian Lamprechter
>> Chairperson of the Supervisory Board: Nicole Lau
>> Registered Office: Munich
>> Commercial Register: Amtsgericht Muenchen HRB 186928
>>
>>
>
>
>--
>Sinan Kaya
>Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm Technologies, Inc.
>Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project.
Intel Deutschland GmbH
Registered Address: Am Campeon 10-12, 85579 Neubiberg, Germany
Tel: +49 89 99 8853-0, www.intel.de
Managing Directors: Christin Eisenschmid, Christian Lamprechter
Chairperson of the Supervisory Board: Nicole Lau
Registered Office: Munich
Commercial Register: Amtsgericht Muenchen HRB 186928