[PATCH V3 3/4] dt-bindings: serial: add a new compatible string for SC9860

Rob Herring robh at kernel.org
Thu Mar 2 22:21:49 PST 2017


On Thu, Mar 02, 2017 at 02:22:09PM +0800, Chunyan Zhang wrote:
> SC9860 use the same serial device, so added a new compatible string to
> support SC9860 as well, also added an example of how to describe this
> serial device in DT.
> 
> Signed-off-by: Chunyan Zhang <chunyan.zhang at spreadtrum.com>
> ---
>  Documentation/devicetree/bindings/serial/sprd-uart.txt | 15 ++++++++++++++-
>  1 file changed, 14 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/serial/sprd-uart.txt b/Documentation/devicetree/bindings/serial/sprd-uart.txt
> index 2aff0f2..8bd8144 100644
> --- a/Documentation/devicetree/bindings/serial/sprd-uart.txt
> +++ b/Documentation/devicetree/bindings/serial/sprd-uart.txt
> @@ -1,7 +1,20 @@
>  * Spreadtrum serial UART
>  
>  Required properties:
> -- compatible: must be "sprd,sc9836-uart"
> +- compatible must contain:
> +  * "sprd,sc9836-uart" for SC9836 and all Spreadtrum SoCs
> +  This also can be specific with:
> +  * "sprd,sc9860-uart" for SC9860

Just say:

- compatible: must be one of:
	"sprd,sc9836-uart"
	"sprd,sc9860-uart", "sprd,sc9836-uart"

> +
>  - reg: offset and length of the register set for the device
>  - interrupts: exactly one interrupt specifier
>  - clocks: phandles to input clocks.
> +
> +Example:
> +	uart0: serial at 70000000 {
> +		compatible = "sprd,sc9860-uart",
> +			     "sprd,sc9836-uart";
> +		reg = <0x000000 0x100>;

unit address doesn't match the reg property.

> +		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&ext_26m>;
> +	};
> -- 
> 2.7.4
> 



More information about the linux-arm-kernel mailing list