[PATCH v5 0/9] meson-gx: reset RGMII PHYs and configure TX delay

[Kevin Hilman]

Jerome Brunet <jbrunet at baylibre.com> writes:

> On Sun, 2017-02-19 at 22:41 +0100, Martin Blumenstingl wrote:
>> This series adds the reset GPIOs for the (external) ethernet PHYs on
>> all
>> GXBB boards.
>> Additionally it provides a ethernet PHY node which can be used to
>> specify
>> PHY-specific properties (this may be required if more boards require
>> the
>> "eee-broken-1000t" for the RTL8211F ethernet PHY). To make all board
>> .dts
>> consistent I chose to add the PHY node also for boards which don't
>> have a
>> RTL8211F PHY.
>> 
>
> Looks good to me. For the patchset:
> Reviewed-by: Jerome Brunet <jbrunet at baylibre.com>
>

Applying to v4.12/dt64 with Jerome's review.

Thanks,

Kevin