[PATCH V2] PCI/ASPM: reconfigure ASPM following hotplug for POLICY_DEFAULT
Patel, Mayurkumar
mayurkumar.patel at intel.com
Thu Mar 2 08:05:17 PST 2017
>
>Hi Bjorn,
>
>On 2/28/2017 1:57 PM, Patel, Mayurkumar wrote:
>>> I was trying to figure out when to use saved values vs. the values in
>>> registers by looking at the enable_cnt.
>>> enable_cnt is 0 during boot on my system.
>> enable_cnt for the root port on my system is set to 1 for "root port" already without saving
>> any ASPM related settings.
>>
>>
>
>What would be the best way to figure out when to save power-on values from
>the registers?
>
So in my case, pci_enable_device() for root port is called from pcie_port_device_register() at the boot time which
Is called from pcie_portdrv_probe() function which does not call pcie_aspm_init_link_state() but
Increment's enable_cnt field. When the Endpoint get plugged in, pcie_aspm_init_link_state() is called
from hotplug routine on "Root port" but due to enable_cnt is already incremented we do not set
right policy and aspm gets disabled by aspm driver.
Shall we introduce new atomic variable along with aspm_default in struct pci_dev and increment it in when called
first time pcie_aspm_init_link_state() to save power-on values ( I have tested it locally, if you think could be good approach
I can upload the diffs) because enable_cnt in pci_enable_device() can be triggered
from multiple places at boot time so it might not be safe to use it?
or adding pcie_aspm_init_link_state() in pcie_port_device_register() for ports before calling pci_enable_device()
although I am not sure whether it's the right approach and that would work for all the devices!
@Kaya/Bjorn: Do you have any other suggestions or Could you also please help by comment what would make sense?
>--
>Sinan Kaya
>Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm Technologies, Inc.
>Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project.
Intel Deutschland GmbH
Registered Address: Am Campeon 10-12, 85579 Neubiberg, Germany
Tel: +49 89 99 8853-0, www.intel.de
Managing Directors: Christin Eisenschmid, Christian Lamprechter
Chairperson of the Supervisory Board: Nicole Lau
Registered Office: Munich
Commercial Register: Amtsgericht Muenchen HRB 186928
More information about the linux-arm-kernel
mailing list