[PATCH] arm: dts: sun8i: split Allwinner H3 .dtsi
maxime.ripard at free-electrons.com
Thu Mar 2 05:58:12 PST 2017
On Thu, Mar 02, 2017 at 04:13:40AM +0800, Icenowy Zheng wrote:
> From: Andre Przywara <andre.przywara at arm.com>
> The new Allwinner H5 SoC is pin-compatible to the H3 SoC, but with the
> Cortex-A7 cores replaced by Cortex-A53 cores and the MMC controller
> updated. So we should really share almost the whole .dtsi.
> In preparation for that move the peripheral parts of the existing
> sun8i-h3.dtsi into a new sunxi-h3-h5.dtsi.
> The actual sun8i-h3.dtsi then includes that and defines the H3 specific
> parts on top of it.
> According to "Allwinner H3 Datasheet Version 1.2 Apr. 23, 2015" 
> Chapter 4.12. GIC and "Allwinner H5 Datasheet Revision 1.0 May. 20,
> 2016"  Chapter 4.12. GIC, the two SoCs both use ARM GIC-400 interrupt
> controller (see the "Note" after the interrupt source table), so the GIC
> node is extracted to sunxi-h3-h5.dtsi as well, and the compatible is
> changed to "arm,gic-400".
This should be in a separate patch.
> On the way get rid of skeleton.dtsi, as recommended in that very file.
> The inclusion of pinctrl-a10.h is also dropped, as it's now not needed
> at all after changing pinctrl binding to the generic pinconf binding.
And that as well...
>  http://linux-sunxi.org/File:Allwinner_H3_Datasheet_V1.2.pdf
>  https://github.com/OrangePiLibra/OrangePi_H5SDK/blob/master/Documentation/Hardware/H5_User_Manual.pdf
Please don't put URLs in commit logs.
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
-------------- next part --------------
A non-text attachment was scrubbed...
Size: 801 bytes
Desc: not available
More information about the linux-arm-kernel