[PATCH] Documentation: dt: Add binding for /secure-chosen/stdout-path

[Jerome Forissier]

Some platforms may use a single device tree to describe two address
spaces, as described in d9f43babb998 ("Documentation: dt: Add bindings
for Secure-only devices"). For these platforms it makes sense to define
a secure counterpart of /chosen, namely: /secure-chosen. This new node
is meant to be used by the secure firmware to pass data to the secure
OS. Only the stdout-path property is supported for now.

Signed-off-by: Jerome Forissier <jerome.forissier at linaro.org>
---
 Documentation/devicetree/bindings/arm/secure.txt | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/arm/secure.txt b/Documentation/devicetree/bindings/arm/secure.txt
index e31303f..e7c596a 100644
--- a/Documentation/devicetree/bindings/arm/secure.txt
+++ b/Documentation/devicetree/bindings/arm/secure.txt
@@ -32,7 +32,8 @@ describe the view of Secure world using the standard bindings. These
 secure- bindings only need to be used where both the Secure and Normal
 world views need to be described in a single device tree.
 
-Valid Secure world properties:
+Valid Secure world properties
+-----------------------------
 
 - secure-status : specifies whether the device is present and usable
   in the secure world. The combination of this with "status" allows
@@ -51,3 +52,15 @@ Valid Secure world properties:
    status = "disabled"; secure-status = "okay";     /* S-only */
    status = "disabled";                             /* disabled in both */
    status = "disabled"; secure-status = "disabled"; /* disabled in both */
+
+The secure-chosen node
+----------------------
+
+Similar to the /chosen node which serves as a place for passing data
+between firmware and the operating system, the /secure-chosen node may
+be used to pass data to the secure OS. Only the properties defined
+below may appear in the /secure-chosen node. They have the same
+definition as when used under /chosen, unless explicitely stated
+otherwise.
+
+- stdout-path
-- 
2.7.4