[PATCH 2/4] mmc: pwrseq-simple: Add optional op. for post_ios_power_on callback

Romain Perier romain.perier at collabora.com
Wed Mar 1 06:53:08 PST 2017


Some devices require to do their entire power sequence after that the
power supply of the MMC has been powered on. This can be done by
only implementing the optional post_ios_power_on() callback that rely on
pre_power_on/post_power_on functions, other functions being NULL. Then
we introduce a new DT property "post_ios_power_on", when this property
is set the driver will use its post_ios_power_on operations, otherwise
it fallbacks to the default operations with pre_power_on/post_power_on.

Signed-off-by: Romain Perier <romain.perier at collabora.com>
---
 drivers/mmc/core/pwrseq_simple.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/core/pwrseq_simple.c b/drivers/mmc/core/pwrseq_simple.c
index 1304160..a9aad9a 100644
--- a/drivers/mmc/core/pwrseq_simple.c
+++ b/drivers/mmc/core/pwrseq_simple.c
@@ -84,12 +84,22 @@ static void mmc_pwrseq_simple_power_off(struct mmc_host *host)
 	}
 }
 
+static void mmc_pwrseq_simple_post_ios_power_on(struct mmc_host *host)
+{
+	mmc_pwrseq_simple_pre_power_on(host);
+	mmc_pwrseq_simple_post_power_on(host);
+}
+
 static const struct mmc_pwrseq_ops mmc_pwrseq_simple_ops = {
 	.pre_power_on = mmc_pwrseq_simple_pre_power_on,
 	.post_power_on = mmc_pwrseq_simple_post_power_on,
 	.power_off = mmc_pwrseq_simple_power_off,
 };
 
+static const struct mmc_pwrseq_ops mmc_pwrseq_post_ios_ops = {
+	.post_ios_power_on = mmc_pwrseq_simple_post_ios_power_on,
+};
+
 static const struct of_device_id mmc_pwrseq_simple_of_match[] = {
 	{ .compatible = "mmc-pwrseq-simple",},
 	{/* sentinel */},
@@ -121,7 +131,10 @@ static int mmc_pwrseq_simple_probe(struct platform_device *pdev)
 				 &pwrseq->post_power_on_delay_ms);
 
 	pwrseq->pwrseq.dev = dev;
-	pwrseq->pwrseq.ops = &mmc_pwrseq_simple_ops;
+	if (device_property_read_bool(dev, "post-ios-power-on"))
+		pwrseq->pwrseq.ops = &mmc_pwrseq_post_ios_ops;
+	else
+		pwrseq->pwrseq.ops = &mmc_pwrseq_simple_ops;
 	pwrseq->pwrseq.owner = THIS_MODULE;
 	platform_set_drvdata(pdev, pwrseq);
 
-- 
2.9.3




More information about the linux-arm-kernel mailing list