[PATCH v2 0/3] meson-gx: Add mali-450 support

[Neil Armstrong]

Since the merge of the Mali dt bindings at [1], add support for Mali clocks
and DT node.

The Mali is clocked by two identical clock paths behind a glitch free mux
to safely change frequency while running.
So these clocks must be added to the meson-gxbb clock controller.

Changes since v1 at [2] :
 - Remove GP0 fixes, this will pushed later, for base frequency it can depend on fclk_div3
 - Add GXL support
 - rebase on clk-next and jbrunet's patchset at [3] and [4]
 - get rid of composite clocks, this adds more clocks IDs and exposes 2 more clocks

[4] http://lkml.kernel.org/r/20170228093016.5624-1-jbrunet@baylibre.com
[3] http://lkml.kernel.org/r/20170228133002.17894-1-jbrunet@baylibre.com
[2] http://lkml.kernel.org/r/1486721084-1383-1-git-send-email-narmstrong@baylibre.com
[1] http://lkml.kernel.org/r/b098c4fa9fce88361cca20417978734d0e1b5cca.1485939041.git-series.maxime.ripard@free-electrons.com

Neil Armstrong (3):
  clk: meson-gxbb: Add MALI clock IDS
  clk: meson-gxbb: Add MALI clocks
  ARM64: dts: meson-gx: Add MALI nodes for GXBB and GXL

 arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi      |  37 ++++++
 arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi  |  43 +++++++
 arch/arm64/boot/dts/amlogic/meson-gxl-s905d.dtsi |   1 +
 arch/arm64/boot/dts/amlogic/meson-gxl-s905x.dtsi |   1 +
 drivers/clk/meson/gxbb.c                         | 139 +++++++++++++++++++++++
 drivers/clk/meson/gxbb.h                         |   9 +-
 include/dt-bindings/clock/gxbb-clkc.h            |   5 +
 7 files changed, 234 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi

-- 
1.9.1