[PATCH 2/4] ARM: dts: imx7d-sdb: Pass phy-reset-gpios

[Fabio Estevam]

From: Fabio Estevam <fabio.estevam at nxp.com>

Pass the phy-reset-gpios property so that Ethernet PHYs can go
through a proper reset.

Signed-off-by: Fabio Estevam <fabio.estevam at nxp.com>
---
 arch/arm/boot/dts/imx7d-sdb.dts | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index 0a24d1b..664582d 100644
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -168,6 +168,7 @@
 	phy-mode = "rgmii";
 	phy-handle = <&ethphy0>;
 	fsl,magic-packet;
+	phy-reset-gpios = <&extended_io 5 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
 	mdio {
-- 
2.7.4