[PATCH 4/5] ARM: dts: at91: at91-sama5d27_som1: add sama5d27 SoM1 support
Ludovic Desroches
ludovic.desroches at microchip.com
Fri Jun 30 05:57:53 PDT 2017
On Fri, Jun 30, 2017 at 03:38:22PM +0300, m18063 wrote:
> Hi Ludovic,
>
> On 29.06.2017 17:58, Ludovic Desroches wrote:
> > On Thu, Jun 29, 2017 at 02:44:33PM +0300, Claudiu Beznea wrote:
> >> Add specific DTS file and bindings for sama5d27 SoM1 board.
> >>
> >> Signed-off-by: Claudiu Beznea <claudiu.beznea at microchip.com>
> >> Signed-off-by: Cristian Birsan <cristian.birsan at microchip.com>
> >> ---
> >> arch/arm/boot/dts/at91-sama5d27_som1.dtsi | 178 ++++++++++++++++++++++++++++++
> >> 1 file changed, 178 insertions(+)
> >> create mode 100644 arch/arm/boot/dts/at91-sama5d27_som1.dtsi
> >>
> >> diff --git a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
> >> new file mode 100644
> >> index 0000000..b3af4d4
> >> --- /dev/null
> >> +++ b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
> >> @@ -0,0 +1,178 @@
> >> +/*
> >> + * at91-sama5d27_som1.dtsi - Device Tree file for SAMA5D27 SoM1 board
> >> + *
> >> + * Copyright (c) 2017, Microchip Technology Inc.
> >> + * 2017 Cristian Birsan <cristian.birsan at microchip.com>
> >> + * 2017 Claudiu Beznea <claudiu.beznea at microchip.com>
> >> + *
> >> + * This file is dual-licensed: you can use it either under the terms
> >> + * of the GPL or the X11 license, at your option. Note that this dual
> >> + * licensing only applies to this file, and not this project as a
> >> + * whole.
> >> + *
> >> + * a) This file is free software; you can redistribute it and/or
> >> + * modify it under the terms of the GNU General Public License as
> >> + * published by the Free Software Foundation; either version 2 of the
> >> + * License, or (at your option) any later version.
> >> + *
> >> + * This file is distributed in the hope that it will be useful,
> >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> >> + * GNU General Public License for more details.
> >> + *
> >> + * Or, alternatively,
> >> + *
> >> + * b) Permission is hereby granted, free of charge, to any person
> >> + * obtaining a copy of this software and associated documentation
> >> + * files (the "Software"), to deal in the Software without
> >> + * restriction, including without limitation the rights to use,
> >> + * copy, modify, merge, publish, distribute, sublicense, and/or
> >> + * sell copies of the Software, and to permit persons to whom the
> >> + * Software is furnished to do so, subject to the following
> >> + * conditions:
> >> + *
> >> + * The above copyright notice and this permission notice shall be
> >> + * included in all copies or substantial portions of the Software.
> >> + *
> >> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> >> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> >> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> >> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> >> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> >> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> >> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> >> + * OTHER DEALINGS IN THE SOFTWARE.
> >> + */
> >> +#include "sama5d2.dtsi"
> >> +#include "sama5d2-pinfunc.h"
> >> +
> >> +/ {
> >> + model = "Atmel SAMA5D27 SoM1";
> >> + compatible = "atmel,sama5d27-som1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
> >> +
> >> + clocks {
> >> + slow_xtal {
> >> + clock-frequency = <32768>;
> >> + };
> >> +
> >> + main_xtal {
> >> + clock-frequency = <24000000>;
> >> + };
> >> + };
> >> +
> >> + ahb {
> >> + apb {
> >> + qspi1: spi at f0024000 {
> >> + pinctrl-names = "default";
> >> + pinctrl-0 = <&pinctrl_qspi1_default>;
> >> + flash at 0 {
> >> + #address-cells = <1>;
> >> + #size-cells = <1>;
> >> + compatible = "jedec,spi-nor";
> >> + reg = <0>;
> >> + spi-max-frequency = <83000000>;
> >> + m25p,fast-read;
> >> +
> >> + at91bootstrap at 00000000 {
> >> + label = "at91bootstrap";
> >> + reg = <0x00000000 0x00010000>;
> >> + };
> >> +
> >> + bootloaderenv at 00010000 {
> >> + label = "bootloader env";
> >> + reg = <0x00010000 0x00010000>;
> >> + };
> >> +
> >> + bootloader at 00020000 {
> >> + label = "bootloader";
> >> + reg = <0x00020000 0x00050000>;
> >> + };
> >> +
> >> + dtb at 00070000 {
> >> + label = "device tree";
> >> + reg = <0x00070000 0x00010000>;
> >> + };
> >> +
> >> + kernel at 00080000 {
> >> + label = "kernel";
> >> + reg = <0x00080000 0x00380000>;
> >> + };
> >
> > I am wondering if it's a good idea to give the flash map here. If we
> > take a kernel generated by a sama5_defconfig, it is about 3.8 MB.
> The flash size here is 8MB. With kernel image of 3.8M, bootloader of 18KB,
> u-boot of 2.2MB, dtb of 31K it will still fit.
Right it can fit, I mean the description gives about 3.5 MB for the kernel so
you can extend it.
Regards
Ludovic
> >
> >> + };
> >> + };
> >> +
> >> + macb0: ethernet at f8008000 {
> >> + pinctrl-names = "default";
> >> + pinctrl-0 = <&pinctrl_macb0_default>;
> >> + phy-mode = "rmii";
> >> +
> >> + ethernet-phy at 1 {
> >> + reg = <0x1>;
> >> + interrupt-parent = <&pioA>;
> >> + interrupts = <73 IRQ_TYPE_LEVEL_LOW>;
> >
> > Are you sure about this value? pinctrl tells PD31 so 127. By the way, it
> > is better to use macros: PIN_PD31.
> Yes, here is a mistake. It has to be PIN_PD31. I will fix it in v2.
>
> Thank you,
> Claudiu
> >
> > Regards
> >
> > Ludovic
> >
> >> + pinctrl-names = "default";
> >> + pinctrl-0 = <&pinctrl_macb0_phy_irq>;
> >> + };
> >> + };
> >> +
> >> + i2c0: i2c at f8028000 {
> >> + dmas = <0>, <0>;
> >> + pinctrl-names = "default";
> >> + pinctrl-0 = <&pinctrl_i2c0_default>;
> >> + i2c-sda-hold-time-ns = <350>;
> >> + status = "disabled";
> >> +
> >> + 24aa at 50 {
> >> + compatible = "24mac602";
> >> + reg = <0x50>;
> >> + pagesize = <8>;
> >> + start-offset = /bits/ 8 <0xf8>;
> >> + read-only;
> >> + };
> >> + };
> >> +
> >> + pinctrl at fc038000 {
> >> +
> >> + pinctrl_i2c0_default: i2c0_default {
> >> + pinmux = <PIN_PD21__TWD0>,
> >> + <PIN_PD22__TWCK0>;
> >> + bias-disable;
> >> + };
> >> +
> >> + pinctrl_macb0_default: macb0_default {
> >> + pinmux = <PIN_PD9__GTXCK>,
> >> + <PIN_PD10__GTXEN>,
> >> + <PIN_PD11__GRXDV>,
> >> + <PIN_PD12__GRXER>,
> >> + <PIN_PD13__GRX0>,
> >> + <PIN_PD14__GRX1>,
> >> + <PIN_PD15__GTX0>,
> >> + <PIN_PD16__GTX1>,
> >> + <PIN_PD17__GMDC>,
> >> + <PIN_PD18__GMDIO>;
> >> + bias-disable;
> >> + };
> >> +
> >> + pinctrl_macb0_phy_irq: macb0_phy_irq {
> >> + pinmux = <PIN_PD31__GPIO>;
> >> + bias-disable;
> >> + };
> >> +
> >> + pinctrl_qspi1_default: qspi1_default {
> >> + sck_cs {
> >> + pinmux = <PIN_PB5__QSPI1_SCK>,
> >> + <PIN_PB6__QSPI1_CS>;
> >> + bias-disable;
> >> + };
> >> +
> >> + data {
> >> + pinmux = <PIN_PB7__QSPI1_IO0>,
> >> + <PIN_PB8__QSPI1_IO1>,
> >> + <PIN_PB9__QSPI1_IO2>,
> >> + <PIN_PB10__QSPI1_IO3>;
> >> + bias-pull-up;
> >> + };
> >> + };
> >> + };
> >> + };
> >> + };
> >> +};
> >> --
> >> 2.7.4
> >>
> >>
> >> _______________________________________________
> >> linux-arm-kernel mailing list
> >> linux-arm-kernel at lists.infradead.org
> >> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
More information about the linux-arm-kernel
mailing list