[PATCH] arm64: dts: r8a7796: Add DRIF support

Ramesh Shanmugasundaram ramesh.shanmugasundaram at bp.renesas.com
Fri Jun 30 03:28:09 PDT 2017


Hi Simon,

> Subject: Re: [PATCH] arm64: dts: r8a7796: Add DRIF support
> 
> On Tue, Jun 27, 2017 at 01:54:38PM +0100, Ramesh Shanmugasundaram wrote:
> > Adds the DRIF controller nodes for r8a7796.
> >
> > Signed-off-by: Ramesh Shanmugasundaram
> > <ramesh.shanmugasundaram at bp.renesas.com>
> > ---
> > Hi Simon,
> >
> >    This patch is based on renesas-devel-20170626-v4.12-rc7 tag.
> >    It is verified on M3 ES1.0. I also verified there are no regression
> issues
> >    with this addition.
> >
> >    The driver[1] is pushed into the media_tree. The bindings[2] are
> ACK'ed
> >    by Geert & Rob and in the media_tree queue.
> >
> >    [1]
> https://git.linuxtv.org/media_tree.git/commit/?id=7625ee981af166ddb569e2e6
> c0006e2af471326f
> >    [2]
> > https://www.mail-archive.com/linux-renesas-soc@vger.kernel.org/msg1560
> > 2.html
> >
> > Thanks,
> > Ramesh.
> >
> >  arch/arm64/boot/dts/renesas/r8a7796.dtsi | 120
> > +++++++++++++++++++++++++++++++
> >  1 file changed, 120 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
> > b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
> > index 1f6710912045..df04d132a127 100644
> > --- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
> > +++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
> > @@ -639,6 +639,126 @@
> >  			};
> >  		};
> >
> > +		drif00: rif at e6f40000 {
> > +			compatible = "renesas,r8a7796-drif",
> > +				     "renesas,rcar-gen3-drif";
> > +			reg = <0 0xe6f40000 0 0x64>;
> > +			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> > +			clocks = <&cpg CPG_MOD 515>;
> > +			clock-names = "fck";
> > +			dmas = <&dmac1 0x20>, <&dmac2 0x20>;
> 
> The dmas property seems a little strange. I would have expected to allow
> ether dmac1 or dmac2 to be used for both tx and rx:
> 
> 			dmas = <&dmac1 0x20>, <&dmac1 0x20>,
> 			       <&dmac2 0x20>, <&dmac2 0x20>;
> 

It is an rx-only interface that can use either dmac1 or 2.

> 
> > +			dma-names = "rx", "rx";
> > +			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
> > +			resets = <&cpg 515>;
> > +			renesas,bonding = <&drif01>;
> > +			status = "disabled";
> > +		};
> 

Thanks,
Ramesh



More information about the linux-arm-kernel mailing list