[PATCH 2/6] clk: at91: add audio pll clock driver
Alexandre Belloni
alexandre.belloni at free-electrons.com
Thu Jun 29 15:11:18 PDT 2017
Hi,
On 29/06/2017 at 16:47:58 -0500, Rob Herring wrote:
> On Fri, Jun 23, 2017 at 11:00:55AM +0200, Quentin Schulz wrote:
> > From: Nicolas Ferre <nicolas.ferre at atmel.com>
> >
> > This new clock driver set allows to have a fractional divided clock that
> > would generate a precise clock particularly suitable for audio
> > applications.
> >
> > The main audio pll clock has two children clocks: one that is connected
> > to the PMC, the other that can directly drive a pad. As these two routes
> > have different enable bits and different dividers and divider formula,
> > they are handled by two different drivers. Each of them could modify the
> > rate of the main audio pll parent.
> > The main audio pll clock can output 620MHz to 700MHz.
> >
> > Signed-off-by: Nicolas Ferre <nicolas.ferre at atmel.com>
> > Signed-off-by: Quentin Schulz <quentin.schulz at free-electrons.com>
> > ---
> > .../devicetree/bindings/clock/at91-clock.txt | 10 +
>
> It would be nice to see at91 to transition away from a node per clock to
> just clock controller nodes. In any case:
>
Yes, that is exactly our plan.
> Acked-by: Rob Herring <robh at kernel.org>
>
> > arch/arm/mach-at91/Kconfig | 4 +
> > drivers/clk/at91/Makefile | 2 +
> > drivers/clk/at91/clk-audio-pll-pad.c | 204 ++++++++++++++++++
> > drivers/clk/at91/clk-audio-pll-pmc.c | 175 +++++++++++++++
> > drivers/clk/at91/clk-audio-pll.c | 237 +++++++++++++++++++++
> > include/linux/clk/at91_pmc.h | 25 +++
> > sound/soc/atmel/atmel-classd.c | 20 +-
> > 8 files changed, 658 insertions(+), 19 deletions(-)
> > create mode 100644 drivers/clk/at91/clk-audio-pll-pad.c
> > create mode 100644 drivers/clk/at91/clk-audio-pll-pmc.c
> > create mode 100644 drivers/clk/at91/clk-audio-pll.c
--
Alexandre Belloni, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
More information about the linux-arm-kernel
mailing list