[Patch v5 12/12] Documention: v4l: Documentation for HEVC CIDs
Kamil Debski
kamil at wypas.org
Wed Jun 28 13:04:05 PDT 2017
Hi,
Please find my comments inline.
On 19 June 2017 at 07:10, Smitha T Murthy <smitha.t at samsung.com> wrote:
> Added V4l2 controls for HEVC encoder
>
> Signed-off-by: Smitha T Murthy <smitha.t at samsung.com>
> ---
> Documentation/media/uapi/v4l/extended-controls.rst | 364 +++++++++++++++++++++
> 1 file changed, 364 insertions(+)
>
> diff --git a/Documentation/media/uapi/v4l/extended-controls.rst b/Documentation/media/uapi/v4l/extended-controls.rst
> index abb1057..7767c70 100644
> --- a/Documentation/media/uapi/v4l/extended-controls.rst
> +++ b/Documentation/media/uapi/v4l/extended-controls.rst
> @@ -1960,6 +1960,370 @@ enum v4l2_vp8_golden_frame_sel -
> 1, 2 and 3 corresponding to encoder profiles 0, 1, 2 and 3.
>
>
[snip]
> +
> +
> +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_LAYER (integer)``
> + Selects the hierarchical coding layer. In normal encoding
> + (non-hierarchial coding), it should be zero. Possible values are 0 ~ 6.
> + 0 indicates HIERARCHICAL CODING LAYER 0, 1 indicates HIERARCHICAL CODING
> + LAYER 1 and so on.
I would like the above to be more consistent. If HIER is in the name
then HIER in the description should be used as well. Aside from that,
I would recommend using full HIERARCHICAL instead of HIER in the name
of the control. Why? Because it is HIERARCHICAL in controls already
present in V4L2, such as
V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING_LAYER_QP.
[snip]
> +
> +``V4L2_CID_MPEG_VIDEO_HEVC_LF (boolean)``
> + Indicates loop filtering. Control value 1 indicates loop filtering
> + is enabled and when set to 0 indicates loop filtering is disabled.
> +
> +``V4L2_CID_MPEG_VIDEO_HEVC_LF_SLICE_BOUNDARY (boolean)``
> + Selects whether to apply the loop filter across the slice boundary or not.
> + If the value is 0, loop filter will not be applied across the slice boundary.
> + If the value is 1, loop filter will be applied across the slice boundary.
Just a thought. Pretty much the same fucntionality is achieved via the
V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_MODE control. It's an enum having
three states: enabled, disabled and disabled at slice boundary. Maybe
a single control could be introduced? With another legacy define for
API compatibility. Also, I don't like that controls are not consistent
between H264 and HEVC. I would opt for the enum option.
> +
> +``V4L2_CID_MPEG_VIDEO_HEVC_LF_BETA_OFFSET_DIV2 (integer)``
> + Selects HEVC loop filter beta offset. The valid range is [-6, +6].
> +
> +``V4L2_CID_MPEG_VIDEO_HEVC_LF_TC_OFFSET_DIV2 (integer)``
> + Selects HEVC loop filter tc offset. The valid range is [-6, +6].
> +
> +.. _v4l2-hevc-refresh-type:
> +
> +``V4L2_CID_MPEG_VIDEO_HEVC_REFRESH_TYPE``
> + (enum)
> +
[snip]
Best wishes,
Kamil
More information about the linux-arm-kernel
mailing list