[PATCH v2 00/52] irqchip: KVM: Add support for GICv4

Wed Jun 28 08:03:19 PDT 2017

Yes, it's been a long time coming, but I really wasn't looking forward
to picking this up again. Anyway...

This (monster of a) series implements full support for GICv4, bringing
direct injection of MSIs to KVM on arm and arm64, assuming you have
the right hardware (which is quite unlikely).

To get an idea of the design, I'd recommend you start with patch #32,
which tries to shed some light on the approach that I've taken. And
before that, please digest some of the GICv3/GICv4 architecture
documentation[1] (less than 800 pages!). Once you feel reasonably
insane, you'll be in the right mood to read the code.

The structure of the series is fairly simple. The initial 34 patches
add some generic support for GICv4, while the rest of the code plugs
KVM into it. This series relies on Eric Auger's irq-bypass series[2],
which is a prerequisite for this work.

The stack has been *very lightly* tested on an arm64 model, with a PCI
virtio block device passed from the host to a guest (using kvmtool and
Jean-Philippe Brucker's excellent VFIO support patches[3]). As it has
never seen any HW, I expect things to be subtly broken, so go forward
and test if you can, though I'm mostly interested in people reviewing
the code at the moment.

I've pushed out a branch based on 4.12-rc6 containing the
dependencies (as well as a couple of debug patches):

git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms.git kvm-arm64/gicv4-kvm

* From v1:
  - The bulk of the 30-something initial patches have seen countless
    bugs being fixed, and some key data structures have been subtly
    tweaked (or killed altogether). They are still quite similar to
    what I had in v1 though.
  - The whole KVM code is brand new and as I said above, only lightly
    tested.
  - Collected a bunch a R-bs from Thomas and Eric (many thanks, guys).

[1] https://static.docs.arm.com/ihi0069/c/IHI0069C_gic_architecture_specification.pdf
[2] http://www.spinics.net/lists/kvm/msg151463.html
[3] http://www.spinics.net/lists/kvm/msg151823.html

Marc Zyngier (52):
  genirq: Let irq_set_vcpu_affinity() iterate over hierarchy
  irqchip/gic-v3: Add redistributor iterator
  irqchip/gic-v3: Add VLPI/DirectLPI discovery
  irqchip/gic-v3-its: Move LPI definitions around
  irqchip/gic-v3-its: Add probing for VLPI properties
  irqchip/gic-v3-its: Macro-ize its_send_single_command
  irqchip/gic-v3-its: Implement irq_set_irqchip_state for pending state
  irqchip/gic-v3-its: Split out property table allocation
  irqchip/gic-v3-its: Allow use of indirect VCPU tables
  irqchip/gic-v3-its: Split out pending table allocation
  irqchip/gic-v3-its: Rework LPI freeing
  irqchip/gic-v3-its: Generalize device table allocation
  irqchip/gic-v3-its: Generalize LPI configuration
  irqchip/gic-v4: Add management structure definitions
  irqchip/gic-v3-its: Add GICv4 ITS command definitions
  irqchip/gic-v3-its: Add VLPI configuration hook
  irqchip/gic-v3-its: Add VLPI map/unmap operations
  irqchip/gic-v3-its: Add VLPI configuration handling
  irqchip/gic-v3-its: Add VPE domain infrastructure
  irqchip/gic-v3-its: Add VPE irq domain allocation/teardown
  irqchip/gic-v3-its: Add VPE irq domain [de]activation
  irqchip/gic-v3-its: Add VPENDBASER/VPROPBASER accessors
  irqchip/gic-v3-its: Add VPE scheduling
  irqchip/gic-v3-its: Add VPE invalidation hook
  irqchip/gic-v3-its: Add VPE affinity changes
  irqchip/gic-v3-its: Add VPE interrupt masking
  irqchip/gic-v3-its: Support VPE doorbell invalidation even when
    !DirectLPI
  irqchip/gic-v3-its: Set implementation defined bit to enable VLPIs
  irqchip/gic-v4: Add per-VM VPE domain creation
  irqchip/gic-v4: Add VPE command interface
  irqchip/gic-v4: Add VLPI configuration interface
  irqchip/gic-v4: Add some basic documentation
  irqchip/gic-v4: Enable low-level GICv4 operations
  irqchip/gic-v3: Advertise GICv4 support to KVM
  KVM: arm/arm64: vgic: Move kvm_vgic_destroy call around
  KVM: arm/arm64: vITS: Add MSI translation helpers
  KVM: arm/arm64: GICv4: Add init and teardown of the vPE irq domain
  KVM: arm/arm64: GICv4: Wire init/teardown of per-VM support
  KVM: arm/arm64: GICv4: Wire mapping/unmapping of VLPIs in VFIO irq
    bypass
  KVM: arm/arm64: GICv4: Handle INT command applied to a VLPI
  KVM: arm/arm64: GICv4: Unmap VLPI when freeing an LPI
  KVM: arm/arm64: GICv4: Handle MOVI applied to a VLPI
  KVM: arm/arm64: GICv4: Handle CLEAR applied to a VLPI
  KVM: arm/arm64: GICv4: Handle MOVALL applied to a vPE
  KVM: arm/arm64: GICv4: Propagate property updates to VLPIs
  KVM: arm/arm64: GICv4: Handle INVALL applied to a vPE
  KVM: arm/arm64: GICv4: Propagate VLPI properties at map time
  KVM: arm/arm64: GICv4: Add doorbell interrupt handling
  KVM: arm/arm64: GICv4: Hook vPE scheduling into vgic flush/sync
  KVM: arm/arm64: GICv4: Enable virtual cpuif if VLPIs can be delivered
  KVM: arm/arm64: GICv4: Use pending_last as a scheduling hint
  KVM: arm/arm64: GICv4: Enable VLPI support

 arch/arm/include/asm/arch_gicv3.h      |   33 +
 arch/arm/kvm/Makefile                  |    1 +
 arch/arm64/include/asm/arch_gicv3.h    |    6 +
 arch/arm64/kvm/Makefile                |    1 +
 drivers/irqchip/Makefile               |    2 +-
 drivers/irqchip/irq-gic-v3-its.c       | 1288 +++++++++++++++++++++++++++++---
 drivers/irqchip/irq-gic-v3.c           |   93 ++-
 drivers/irqchip/irq-gic-v4.c           |  209 ++++++
 include/kvm/arm_vgic.h                 |   19 +
 include/linux/irqchip/arm-gic-common.h |    2 +
 include/linux/irqchip/arm-gic-v3.h     |   84 +++
 include/linux/irqchip/arm-gic-v4.h     |  102 +++
 kernel/irq/manage.c                    |   14 +-
 virt/kvm/arm/arm.c                     |   31 +-
 virt/kvm/arm/hyp/vgic-v3-sr.c          |    9 +-
 virt/kvm/arm/vgic/vgic-init.c          |   11 +-
 virt/kvm/arm/vgic/vgic-its.c           |  165 ++--
 virt/kvm/arm/vgic/vgic-v3.c            |    6 +
 virt/kvm/arm/vgic/vgic-v4.c            |  210 ++++++
 virt/kvm/arm/vgic/vgic.c               |    7 +
 virt/kvm/arm/vgic/vgic.h               |   10 +
 21 files changed, 2103 insertions(+), 200 deletions(-)
 create mode 100644 drivers/irqchip/irq-gic-v4.c
 create mode 100644 include/linux/irqchip/arm-gic-v4.h
 create mode 100644 virt/kvm/arm/vgic/vgic-v4.c

-- 
2.11.0