[PATCH RFC 0/2] Initial Allwinner V3s CSI Support
Yong Deng
yong.deng at magewell.com
Tue Jun 27 04:07:32 PDT 2017
This patchset add initial support for Allwinner V3s CSI.
Allwinner V3s SoC have two CSI module. CSI0 is used for MIPI interface
and CSI1 is used for parallel interface. This is not documented in
datatsheet but by testing and guess.
This patchset implement a v4l2 framework driver and add a binding
documentation for it.
Currently, the driver only support the parallel interface. And has been
tested with a BT1120 signal which generating from FPGA. The following
fetures are not support with this patchset:
- ISP
- MIPI-CSI2
- Master clock for camera sensor
- Power regulator for the front end IC
Yong Deng (2):
media: V3s: Add support for Allwinner CSI.
dt-bindings: add binding documentation for Allwinner CSI
.../devicetree/bindings/media/sunxi-csi.txt | 51 ++
drivers/media/platform/Kconfig | 1 +
drivers/media/platform/Makefile | 2 +
drivers/media/platform/sunxi-csi/Kconfig | 8 +
drivers/media/platform/sunxi-csi/Makefile | 3 +
drivers/media/platform/sunxi-csi/sunxi_csi.c | 535 +++++++++++++
drivers/media/platform/sunxi-csi/sunxi_csi.h | 203 +++++
drivers/media/platform/sunxi-csi/sunxi_csi_v3s.c | 827 +++++++++++++++++++++
drivers/media/platform/sunxi-csi/sunxi_csi_v3s.h | 206 +++++
drivers/media/platform/sunxi-csi/sunxi_video.c | 667 +++++++++++++++++
drivers/media/platform/sunxi-csi/sunxi_video.h | 61 ++
11 files changed, 2564 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/sunxi-csi.txt
create mode 100644 drivers/media/platform/sunxi-csi/Kconfig
create mode 100644 drivers/media/platform/sunxi-csi/Makefile
create mode 100644 drivers/media/platform/sunxi-csi/sunxi_csi.c
create mode 100644 drivers/media/platform/sunxi-csi/sunxi_csi.h
create mode 100644 drivers/media/platform/sunxi-csi/sunxi_csi_v3s.c
create mode 100644 drivers/media/platform/sunxi-csi/sunxi_csi_v3s.h
create mode 100644 drivers/media/platform/sunxi-csi/sunxi_video.c
create mode 100644 drivers/media/platform/sunxi-csi/sunxi_video.h
--
1.8.3.1
More information about the linux-arm-kernel
mailing list