[PATCH 4/6] arm: sun8i: orangepi-one: use internal phy-mode

[Corentin Labbe]

Since the PHY used is internal, simply set phy-mode as internal.

Signed-off-by: Corentin Labbe <clabbe.montjoie at gmail.com>
---
 arch/arm/boot/dts/sun8i-h3-orangepi-one.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
index 6880268e8b87..27e7ef4e42f2 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
@@ -100,7 +100,7 @@
 
 &emac {
 	phy-handle = <&int_mii_phy>;
-	phy-mode = "mii";
+	phy-mode = "internal";
 	allwinner,leds-active-low;
 	status = "okay";
 };
-- 
2.13.0