[PATCH 9/9] firmware: arm_scmi: probe and initialise all the supported protocols
Sudeep Holla
sudeep.holla at arm.com
Mon Jun 26 08:55:13 PDT 2017
Now that we have basic support for all the protocols in the
specification, let's probe them individually and initialise them.
Signed-off-by: Sudeep Holla <sudeep.holla at arm.com>
---
drivers/firmware/arm_scmi/common.h | 5 +++
drivers/firmware/arm_scmi/driver.c | 71 +++++++++++++++++++++++++++++++++++++-
2 files changed, 75 insertions(+), 1 deletion(-)
diff --git a/drivers/firmware/arm_scmi/common.h b/drivers/firmware/arm_scmi/common.h
index 7473dfcad4ee..d7c73a8d260b 100644
--- a/drivers/firmware/arm_scmi/common.h
+++ b/drivers/firmware/arm_scmi/common.h
@@ -118,4 +118,9 @@ int scmi_version_get(const struct scmi_handle *h, u8 protocol, u32 *version);
void scmi_setup_protocol_implemented(const struct scmi_handle *handle,
u8 *prot_imp);
+typedef int (*scmi_init_fn_t)(struct scmi_handle *);
int scmi_base_protocol_init(struct scmi_handle *h);
+int scmi_perf_protocol_init(struct scmi_handle *h);
+int scmi_sensors_protocol_init(struct scmi_handle *h);
+int scmi_power_protocol_init(struct scmi_handle *h);
+int scmi_clock_protocol_init(struct scmi_handle *h);
diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c
index 45f31eaf085a..d3d289f7a174 100644
--- a/drivers/firmware/arm_scmi/driver.c
+++ b/drivers/firmware/arm_scmi/driver.c
@@ -157,6 +157,12 @@ struct scmi_shared_mem {
u8 msg_payload[0];
};
+struct scmi_protocol_match {
+ u8 protocol_id;
+ scmi_init_fn_t fn;
+ char name[32];
+};
+
static int scmi_linux_errmap[] = {
/* better than switch case as long as return value is continuous */
0, /* SCMI_SUCCESS */
@@ -680,6 +686,41 @@ static int scmi_xfer_info_init(struct scmi_info *sinfo)
return 0;
}
+static const struct scmi_protocol_match scmi_protocols[] = {
+ {
+ .protocol_id = SCMI_PROTOCOL_PERF,
+ .fn = scmi_perf_protocol_init,
+ .name = "scmi-cpufreq",
+ }, {
+ .protocol_id = SCMI_PROTOCOL_CLOCK,
+ .fn = scmi_clock_protocol_init,
+ .name = "scmi-clocks",
+ }, {
+ .protocol_id = SCMI_PROTOCOL_POWER,
+ .fn = scmi_power_protocol_init,
+ .name = "scmi-power-domain",
+ }, {
+ .protocol_id = SCMI_PROTOCOL_SENSOR,
+ .fn = scmi_sensors_protocol_init,
+ .name = "scmi-hwmon",
+ },
+ {}
+};
+
+static const struct scmi_protocol_match *scmi_protocol_match_get(u8 protocol_id)
+{
+ int i;
+ const struct scmi_protocol_match *match = NULL, *loop = scmi_protocols;
+
+ for (i = 0; i < ARRAY_SIZE(scmi_protocols); i++, loop++)
+ if (loop->protocol_id == protocol_id) {
+ match = loop;
+ break;
+ }
+
+ return match;
+}
+
static int scmi_probe(struct platform_device *pdev)
{
int ret = -EINVAL;
@@ -690,7 +731,7 @@ static int scmi_probe(struct platform_device *pdev)
const struct scmi_desc *desc;
struct scmi_info *info = NULL;
struct device *dev = &pdev->dev;
- struct device_node *shmem, *np = dev->of_node;
+ struct device_node *child, *shmem, *np = dev->of_node;
desc = of_match_device(scmi_of_match, dev)->data;
@@ -755,6 +796,34 @@ static int scmi_probe(struct platform_device *pdev)
list_add_tail(&info->node, &scmi_list);
mutex_unlock(&scmi_list_mutex);
+ for_each_available_child_of_node(np, child) {
+ int init_ret;
+ u32 protocol_id;
+ const struct scmi_protocol_match *match;
+
+ if (of_property_read_u32(child, "reg", &protocol_id))
+ continue;
+
+ protocol_id &= MSG_PROTOCOL_ID_MASK;
+
+ if (!scmi_is_protocol_implemented(handle, protocol_id)) {
+ dev_err(dev, "SCMI protocol %d not implemented\n",
+ protocol_id);
+ continue;
+ }
+
+ match = scmi_protocol_match_get(protocol_id);
+ if (match) {
+ init_ret = match->fn(handle);
+ if (!init_ret)
+ of_platform_device_create(child, match->name,
+ dev);
+ else
+ dev_err(dev, "SCMI protocol %d init error %d\n",
+ protocol_id, init_ret);
+ }
+ }
+
return 0;
out:
if (!IS_ERR(info->tx_chan))
--
2.7.4
More information about the linux-arm-kernel
mailing list