[PATCH 1/9] clk: clk-divider: add CLK_DIVIDER_ZERO_GATE clk support

[A.s. Dong]

Hi Stephen,

> -----Original Message-----
> From: Dong Aisheng [mailto:dongas86 at gmail.com]
> Sent: Tuesday, June 20, 2017 5:08 PM
> To: Stephen Boyd
> Cc: A.s. Dong; linux-clk at vger.kernel.org; linux-kernel at vger.kernel.org;
> linux-arm-kernel at lists.infradead.org; mturquette at baylibre.com;
> shawnguo at kernel.org; Anson Huang; Jacky Bai
> Subject: Re: [PATCH 1/9] clk: clk-divider: add CLK_DIVIDER_ZERO_GATE clk
> support
> 
> Hi Stephen,
> 
> On Mon, Jun 19, 2017 at 06:45:12PM -0700, Stephen Boyd wrote:
> > On 05/15, Dong Aisheng wrote:
> > > ---
> > >  drivers/clk/clk-divider.c    | 2 ++
> > >  include/linux/clk-provider.h | 4 ++++
> > >  2 files changed, 6 insertions(+)
> > >
> > > diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c
> > > index 96386ff..f78ba7a 100644
> > > --- a/drivers/clk/clk-divider.c
> > > +++ b/drivers/clk/clk-divider.c
> > > @@ -125,6 +125,8 @@ unsigned long divider_recalc_rate(struct clk_hw
> > > *hw, unsigned long parent_rate,
> > >
> > >  	div = _get_div(table, val, flags, divider->width);
> > >  	if (!div) {
> > > +		if (flags & CLK_DIVIDER_ZERO_GATE)
> > > +			return 0;
> > >  		WARN(!(flags & CLK_DIVIDER_ALLOW_ZERO),
> >
> > Why not use the CLK_DIVIDER_ALLOW_ZERO flag? A clk being off doesn't
> > mean the rate is 0. The divider is just disabled, so we would consider
> > the rate as whatever the parent is, which is what this code does
> > before this patch. Similarly, we don't do anything about gate clocks
> > and return a rate of 0 when they're disabled.
> >
> 
> The semantic of CLK_DIVIDER_ALLOW_ZERO seems a bit different.
> 
> See below definition:
> * CLK_DIVIDER_ALLOW_ZERO - Allow zero divisors.  For dividers which have
> *      CLK_DIVIDER_ONE_BASED set, it is possible to end up with a zero
> divisor.
> *      Some hardware implementations gracefully handle this case and allow
> a
> *      zero divisor by not modifying their input clock
> *      (divide by one / bypass).
> 
> zero divisor is simply as divide by one or bypass which is supported by
> hardware.
> 
> But it's not true for this hardware.
> 
> If we consider the rate as whatever the parent is if divider is zero, we
> may got an issue like below:
> e.g.
> Assuming spll_bus_clk divider is 0x0 and it may be enabled by users
> directly without setting a rate first.
> 
> Then the clock tree looks like:
> ...
> spll_pfd0                    1            1   500210526          0 0
>   spll_pfd_sel              1            1   500210526          0 0
>     spll_sel               1            1   500210526          0 0
>       spll_bus_clk           1            1   500210526          0 0
> 
> But the spll_bus_clk clock rate actually is wrong and it's even not
> enabled, not like CLK_DIVIDER_ALLOW_ZERO which zero divider means simply
> bypass.
> 
> So for this case, we probably can't simply assume zero divider rate as its
> parent, it is actually set to 0 in hw, although it's something like gate,
> but a bit different from gate as the normal gate does not affect divider
> where you can keep the rate.
> 
> How would you suggest for this?
> 

Any suggestions?

Regards
Dong Aisheng

> Regards
> Dong Aisheng
> 
> > >  			"%s: Zero divisor and CLK_DIVIDER_ALLOW_ZERO not set\n",
> > >  			clk_hw_get_name(hw));
> >
> > --
> > Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a
> > Linux Foundation Collaborative Project
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-clk"
> > in the body of a message to majordomo at vger.kernel.org More majordomo
> > info at  http://vger.kernel.org/majordomo-info.html