[PATCH v4 1/6] clk: sunxi-ng: div: Add support for fixed post-divider
Priit Laes
plaes at plaes.org
Sun Jun 25 13:45:42 PDT 2017
SATA clock on sun4i/sun7i is of type (parent) / M / 6 where
6 is fixed post-divider.
Signed-off-by: Priit Laes <plaes at plaes.org>
---
drivers/clk/sunxi-ng/ccu_div.c | 12 ++++++++++--
drivers/clk/sunxi-ng/ccu_div.h | 3 ++-
2 files changed, 12 insertions(+), 3 deletions(-)
diff --git a/drivers/clk/sunxi-ng/ccu_div.c b/drivers/clk/sunxi-ng/ccu_div.c
index c0e5c10..de30e15 100644
--- a/drivers/clk/sunxi-ng/ccu_div.c
+++ b/drivers/clk/sunxi-ng/ccu_div.c
@@ -62,8 +62,13 @@ static unsigned long ccu_div_recalc_rate(struct clk_hw *hw,
parent_rate = ccu_mux_helper_apply_prediv(&cd->common, &cd->mux, -1,
parent_rate);
- return divider_recalc_rate(hw, parent_rate, val, cd->div.table,
- cd->div.flags);
+ val = divider_recalc_rate(hw, parent_rate, val, cd->div.table,
+ cd->div.flags);
+
+ if (cd->common.features & CCU_FEATURE_FIXED_POSTDIV)
+ val /= cd->fixed_post_div;
+
+ return val;
}
static int ccu_div_determine_rate(struct clk_hw *hw,
@@ -89,6 +94,9 @@ static int ccu_div_set_rate(struct clk_hw *hw, unsigned long rate,
val = divider_get_val(rate, parent_rate, cd->div.table, cd->div.width,
cd->div.flags);
+ if (cd->common.features & CCU_FEATURE_FIXED_POSTDIV)
+ val *= cd->fixed_post_div;
+
spin_lock_irqsave(cd->common.lock, flags);
reg = readl(cd->common.base + cd->common.reg);
diff --git a/drivers/clk/sunxi-ng/ccu_div.h b/drivers/clk/sunxi-ng/ccu_div.h
index 08d0744..f3a5028 100644
--- a/drivers/clk/sunxi-ng/ccu_div.h
+++ b/drivers/clk/sunxi-ng/ccu_div.h
@@ -86,9 +86,10 @@ struct ccu_div_internal {
struct ccu_div {
u32 enable;
- struct ccu_div_internal div;
+ struct ccu_div_internal div;
struct ccu_mux_internal mux;
struct ccu_common common;
+ unsigned int fixed_post_div;
};
#define SUNXI_CCU_DIV_TABLE_WITH_GATE(_struct, _name, _parent, _reg, \
--
git-series 0.9.1
More information about the linux-arm-kernel
mailing list