[PATCH 4/5] ARM: dts: Add Socionext MB86S71 and Fujitsu F-Cue
Andreas Färber
afaerber at suse.de
Sun Jun 25 10:00:19 PDT 2017
Add Device Trees for Socionext MB86S71 SoC and Fujitsu F-Cue board.
Signed-off-by: Andreas Färber <afaerber at suse.de>
---
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/mb86s71-f-cue.dts | 38 ++++++++
arch/arm/boot/dts/mb86s71.dtsi | 178 ++++++++++++++++++++++++++++++++++++
3 files changed, 218 insertions(+)
create mode 100644 arch/arm/boot/dts/mb86s71-f-cue.dts
create mode 100644 arch/arm/boot/dts/mb86s71.dtsi
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 4b17f35dc9a7..48dda2de0a3d 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -526,6 +526,8 @@ dtb-$(CONFIG_ARCH_MXS) += \
imx28-m28evk.dtb \
imx28-sps1.dtb \
imx28-tx28.dtb
+dtb-$(CONFIG_ARCH_MB86S7X) += \
+ mb86s71-f-cue.dtb
dtb-$(CONFIG_ARCH_NOMADIK) += \
ste-nomadik-s8815.dtb \
ste-nomadik-nhk15.dtb
diff --git a/arch/arm/boot/dts/mb86s71-f-cue.dts b/arch/arm/boot/dts/mb86s71-f-cue.dts
new file mode 100644
index 000000000000..148d1aee11a6
--- /dev/null
+++ b/arch/arm/boot/dts/mb86s71-f-cue.dts
@@ -0,0 +1,38 @@
+/*
+ * Fujitsu F-Cue board
+ *
+ * Copyright (c) 2017 Andreas Färber
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/dts-v1/;
+
+#include "mb86s71.dtsi"
+
+/ {
+ compatible = "fujitsu,f-cue", "fujitsu,mb86s71";
+ model = "Fujitsu F-Cue";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ /* vendor U-Boot looks for /memory */
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x80000000>;
+ };
+};
+
+&arch_timer {
+ clock-frequency = <125000000>;
+};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/mb86s71.dtsi b/arch/arm/boot/dts/mb86s71.dtsi
new file mode 100644
index 000000000000..154f1ab89f0a
--- /dev/null
+++ b/arch/arm/boot/dts/mb86s71.dtsi
@@ -0,0 +1,178 @@
+/*
+ * Socionext MB86S71 SoC
+ *
+ * Copyright (c) 2017 Andreas Färber
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "fujitsu,mb86s71";
+ interrupt-parent = <&gic>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu at 0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x0>;
+ cci-control-port = <&cci_control4>;
+ next-level-cache = <&l2_big>;
+ };
+
+ cpu1: cpu at 1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x1>;
+ cci-control-port = <&cci_control4>;
+ next-level-cache = <&l2_big>;
+ };
+
+ cpu2: cpu at 100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x100>;
+ cci-control-port = <&cci_control3>;
+ next-level-cache = <&l2_little>;
+ };
+
+ cpu3: cpu at 101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x101>;
+ cci-control-port = <&cci_control3>;
+ next-level-cache = <&l2_little>;
+ };
+
+ l2_big: l2-cache-big {
+ compatible = "cache";
+ };
+
+ l2_little: l2-cache-little {
+ compatible = "cache";
+ };
+ };
+
+ arch_timer: timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ pmu-big {
+ compatible = "arm,cortex-a15-pmu";
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>;
+ };
+
+ pmu-little {
+ compatible = "arm,cortex-a7-pmu";
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu2>, <&cpu3>;
+ };
+
+ cci at 2c090000 {
+ compatible = "arm,cci-400";
+ reg = <0x2c090000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x2c090000 0x10000>;
+
+ cci_control0: slave-if at 1000 {
+ compatible = "arm,cci-400-ctrl-if";
+ reg = <0x1000 0x1000>;
+ interface-type = "ace-lite";
+ };
+
+ cci_control1: slave-if at 2000 {
+ compatible = "arm,cci-400-ctrl-if";
+ reg = <0x2000 0x1000>;
+ interface-type = "ace-lite";
+ };
+
+ cci_control2: slave-if at 3000 {
+ compatible = "arm,cci-400-ctrl-if";
+ reg = <0x3000 0x1000>;
+ interface-type = "ace-lite";
+ };
+
+ cci_control3: slave-if at 4000 {
+ compatible = "arm,cci-400-ctrl-if";
+ reg = <0x4000 0x1000>;
+ interface-type = "ace";
+ };
+
+ cci_control4: slave-if at 5000 {
+ compatible = "arm,cci-400-ctrl-if";
+ reg = <0x5000 0x1000>;
+ interface-type = "ace";
+ };
+
+ pmu at 9000 {
+ compatible = "arm,cci-400-pmu,r0";
+ reg = <0x9000 0x5000>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x80000000>;
+
+ gic: interrupt-controller at 2c001000 {
+ compatible = "arm,cortex-a15-gic";
+ reg = <0x2c001000 0x1000>,
+ <0x2c002000 0x2000>,
+ <0x2c004000 0x2000>,
+ <0x2c006000 0x2000>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ };
+
+ uart0: serial at 31040000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x31040000 0x100>;
+ arm,primecell-periphid = <0x00341011>;
+ interrupts = <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ uart1: serial at 31050000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x31050000 0x100>;
+ arm,primecell-periphid = <0x00341011>;
+ interrupts = <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ uart2: serial at 31060000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x31060000 0x100>;
+ arm,primecell-periphid = <0x00341011>;
+ interrupts = <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ timer at 31080000 {
+ compatible = "arm,sp804";
+ reg = <0x31080000 0x10000>;
+ interrupts = <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+};
--
2.12.3
More information about the linux-arm-kernel
mailing list