[PATCH] ARM: dts: exynos: Exynos5422 Odroid-XU* incomplete thermal-zones definition
Anand Moon
linux.amoon at gmail.com
Sun Jun 25 06:23:24 PDT 2017
Hi Willy,
On 24 June 2017 at 02:39, Willy Wolff <willy.mh.wolff at gmail.com> wrote:
> Odroid XU*-familly boards has thermal sensors per A15 cores, but the actual
> thermal-zones define only cooling-maps action for cpu0.
>
> If the application is running on all cores but core4 (first core of the A15
> cluster), the CPU can reach high temperature without any proper cooling
> action.
>
> As already discus in prior mail, and on IRC, it's a quit big code
> duplication, but I don't found the write way to express that in a better
> way.
>
> The situation for this board is that we have multiple sensors, but
> matching cooling devices for these sensors act for the same physical
> device (FAN and A15 cluster, as each core of the cluster share the same
> frequency).
> In fact, of-thermal.c:473:thermal_zone_of_sensor_register() can't use
> multiple sensors for one single thermal zone.
> This patch follow the path taken in arch/arm/boot/dts/qcom-apq8084.dtsi:97
>
> I'm interested to extending the thermal driver, but it will takes time.
> So this is a workaround before refactoring the driver.
> If somebody knows how to write it better, any advice and suggestions
> are more than welcome.
>
> Also, the comment for cpu_alert4 in cooling-maps definition is not
> accurate, 11 steps for A15 correspond to 700MHz, not 600MHz.
>
[snip]
Few point to from my side.
1: We should also increase the trip points temperature so that it can
throttle at high temperature.
2: We should also increase the tips from 4 to 8 to support different
cluster of cpu's.
3: To avoid duplication of cooling-maps we can make tmu sensor work
differently for cluster of cpu's
tmu_cpu0: handle pwm-fan control.
tmu_cpu1: handle cpu[0-3] cpufreq mapping.
tmu_cpu2: handle cpu[4-7] cpufreq mapping.
tmu_gpu: handle gpu (mali) cpu throttle.
Please share your thought on this new approach.
I generally test using linaro's pm-qa and most of the time the test case fails
# git clone git://git.linaro.org/tools/pm-qa.git
# make -C thermal check
-Best Regards
-Anand Moon
More information about the linux-arm-kernel
mailing list