[PATCH v2 07/11] drm: sun4i: add support for the TV encoder in H3 SoC

[Maxime Ripard]

On Tue, Jun 13, 2017 at 05:51:42PM +0800, Icenowy Zheng wrote:
> 
> 
> 于 2017年6月13日 GMT+08:00 下午3:44:32, Maxime Ripard <maxime.ripard at free-electrons.com> 写到:
> >On Sun, Jun 11, 2017 at 02:43:42PM +0800, icenowy at aosc.io wrote:
> >> 在 2017-06-07 17:38，Maxime Ripard 写道：
> >> > On Mon, Jun 05, 2017 at 12:01:45AM +0800, Icenowy Zheng wrote:
> >> > > Allwinner H3 features a TV encoder similar to the one in earlier
> >SoCs,
> >> > > but has a internal fixed clock divider that divides the TCON1
> >clock
> >> > > (called TVE clock in datasheet) by 11.
> >> > > 
> >> > > Add support for it.
> >> > > 
> >> > > Signed-off-by: Icenowy Zheng <icenowy at aosc.io>
> >> > > ---
> >> > > Changes in v2:
> >> > > - Quirk part rewritten.
> >> > > 
> >> > >  drivers/gpu/drm/sun4i/sun4i_tv.c | 35
> >> > > ++++++++++++++++++++++++++++++++++-
> >> > >  1 file changed, 34 insertions(+), 1 deletion(-)
> >> > > 
> >> > > diff --git a/drivers/gpu/drm/sun4i/sun4i_tv.c
> >> > > b/drivers/gpu/drm/sun4i/sun4i_tv.c
> >> > > index 338b9e5bb2a3..b9ff6d5ea67a 100644
> >> > > --- a/drivers/gpu/drm/sun4i/sun4i_tv.c
> >> > > +++ b/drivers/gpu/drm/sun4i/sun4i_tv.c
> >> > > @@ -13,6 +13,7 @@
> >> > >  #include <linux/clk.h>
> >> > >  #include <linux/component.h>
> >> > >  #include <linux/of_address.h>
> >> > > +#include <linux/of_device.h>
> >> > >  #include <linux/regmap.h>
> >> > >  #include <linux/reset.h>
> >> > > 
> >> > > @@ -169,14 +170,21 @@ struct tv_mode {
> >> > >  	const struct resync_parameters	*resync_params;
> >> > >  };
> >> > > 
> >> > > +struct sun4i_tv_quirks {
> >> > > +	int fixed_divider;
> >> > > +};
> >> > > +
> >> > >  struct sun4i_tv {
> >> > >  	struct drm_connector	connector;
> >> > >  	struct drm_encoder	encoder;
> >> > > 
> >> > >  	struct clk		*clk;
> >> > > +	struct clk		*mod_clk;
> >> > >  	struct regmap		*regs;
> >> > >  	struct reset_control	*reset;
> >> > > 
> >> > > +	const struct sun4i_tv_quirks *quirks;
> >> > > +
> >> > >  	struct sun4i_drv	*drv;
> >> > >  };
> >> > > 
> >> > > @@ -391,6 +399,12 @@ static void sun4i_tv_mode_set(struct
> >> > > drm_encoder *encoder,
> >> > >  	struct sun4i_tcon *tcon = crtc->tcon;
> >> > >  	const struct tv_mode *tv_mode = sun4i_tv_find_tv_by_mode(mode);
> >> > > 
> >> > > +	if (tv->quirks->fixed_divider) {
> >> > > +		DRM_DEBUG_DRIVER("Applying fixed divider %d on TVE clock\n",
> >> > > +				 tv->quirks->fixed_divider);
> >> > > +		mode->crtc_clock *= tv->quirks->fixed_divider;
> >> > > +	}
> >> > > +
> >> > 
> >> > You're not allowed to change the mode in mode_set, and you
> >shouldn't
> >> > even change it. The output pixel clock is still 27MHz.
> >> > 
> >> > You should implement that using the states, as we discussed
> >already.
> >> 
> >> After reading the comments at
> >include/drm/drm_modeset_helper_vtables.h,
> >> I think the atomic_check function is allowed to directly change
> >> the adjust_mode of crtc_state.
> >> 
> >> And according to other comments at include/drm/drm_modes.h, the
> >> crtc_clock in adjust_mode should be the clock to be really feed
> >> to the hardware.
> >> 
> >> So I think I can just change this in atomic_check.
> >> 
> >> However, the mode_set function of sun4i_tv seems to be not
> >> regarding adjusted_mode and still use original mode.
> >> 
> >> So my current design is:
> >> - Multiply adjusted_mode in atomic_check.
> >> - Feed adjust_mode to TCON code in mode_set function.
> >> 
> >> Is this proper?
> >> 
> >> (From my own understanding to the comments I think so.)
> >
> >No, it's not. The pixel clock in the mode is the pixel clock output
> >physically by the connector. You want to use it for an intermediate
> >clock in your pipeline.
> >
> >This is not the same clock, and not the same frequency.
> 
> So should a multiplier parameter be passed via
> tcon1_mode_set function?

No, and I've explained a couple of times already what you needed to
do. Please read again the previous messages.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20170623/bfc324b1/attachment.sig>